UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For Fiscal Year Ended October 31, 2006.

THE TORO COMPANY

(Exact name of registrant as specified in its charter)

8111 Lyndale Avenue South
Bloomington, Minnesota 55420-1196
Telephone number: (952) 888-8801

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:
None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes x    No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes o    No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months and (2) has been subject to such filing requirements for the past 90 days.    Yes x    No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act.

Large accelerated filer        x        Accelerated filer        o        Non-accelerated filer        o

Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2).    Yes o    No x

The aggregate market value of the voting stock held by non-affiliates of the registrant, based on the closing price of the Common Stock on May 5, 2006, the last business day of the registrant’s most recently completed second fiscal quarter, as reported by the New York Stock Exchange, was approximately $2.1 billion.

The number of shares of Common Stock outstanding as of December 15, 2006 was 41,044,271.

Documents Incorporated by Reference

Portions of the registrant’s Proxy Statement for the Annual Meeting of Stockholders to be held March 13, 2007 are incorporated by reference into Part III.

THE TORO COMPANY
FORM 10-K
TABLE OF CONTENTS

2

PART I

ITEM 1.            BUSINESS

Introduction

The Toro Company was incorporated in Minnesota in 1935 as a successor to a business founded in 1914 and reincorporated in Delaware in 1983. Unless the context indicates otherwise, the terms “company,” “Toro,” “we,” and “our” refer to The Toro Company and its subsidiaries. Our executive offices are located at 8111 Lyndale Avenue South, Bloomington, Minnesota 55420-1196, telephone number (952) 888-8801. Our Internet address for Toro branded product related information is www.toro.com and our web site for corporate and investor information is www.thetorocompany.com. The information contained on our web sites or connected to our web sites is not incorporated by reference into this Annual Report on Form 10-K and should not be considered part of this report.

We design, manufacture, and market professional turf maintenance equipment and services, turf and micro irrigation systems, landscaping equipment, and residential yard products. We produced our first mower for golf course use in 1921 and our first lawn mower for home use in 1939, and we have continued to enhance our product lines ever since. We classify our operations into two reportable segments: professional and residential. A third segment called “other” consists of domestic company-owned distributorships, corporate functions, and Toro Credit Company, a wholly owned financing subsidiary. Net sales of our segments accounted for the following approximate percentages of our consolidated net sales for fiscal 2006: Professional, 67 percent; Residential, 31 percent; and Other, 2 percent.

Our products are advertised and sold at the retail level under the primary trademarks of Toro®, Toro® Wheel Horse®, Lawn-Boy®, Irritrol®, Exmark®, Toro® Dingo®, Aqua-TraXX®, Pope®, Hayter®, and Lawn Genie®, most of which are registered in the United States and/or in the principal foreign countries where we market our products. This report also contains trademarks, trade names, and service marks that are owned by other persons or entities, such as The Home Depot.

We emphasize quality and innovation in our customer service, products, manufacturing, and marketing. We strive to provide well-built, dependable products supported by an extensive service network. We have committed funding for engineering and research in order to improve existing products and develop new products. Through these efforts, we seek to be responsive to trends that may affect our target markets now and in the future. A sizeable portion of our revenue has historically been attributable to new and enhanced products. Our mission is to be the leading worldwide provider of outdoor landscaping products, support services, and integrated systems that help customers preserve and beautify their outdoor landscapes with environmentally responsible solutions of customer-valued quality and innovation. Additional information on our strategic initiatives is included in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” of this report.

Products by Market

We strive to be a leader in adapting advanced technologies to products and services that provide solutions for landscape, turf care maintenance, and residential demands. The following is a summary of our products by market for the professional and residential segments:

Professional – We design professional turf products and market them worldwide through a network of distributors and dealers as well as directly to government customers and rental companies. Products are sold by distributors and dealers to professional users engaged in maintaining and creating landscapes, such as golf courses, sports fields, municipal properties, and residential and commercial landscapes. Professional turf maintenance equipment marketed under the Toro brand name is our oldest product line that began in 1921 with tractor-towed mowers for golf courses. Over time, we have expanded our product lines to include products designed for large turf areas, such as golf courses, schools, parks, cemeteries, sports fields, industrial sites, apartments, and townhouse complexes.

Landscape Contractor Market. Products for the landscape contractor market include zero-turn radius riding mowers, 21-inch heavy-duty walk behind mowers, mid-size walk behind mowers, and compact utility loaders. These products are sold through distributors and dealers, and are also available through rental centers to individuals and companies who maintain and create residential and commercial landscapes on behalf of property owners. We market products to landscape contractors under the Toro, Exmark, and Lawn-Boy brands.

In fiscal 2006, we introduced a new line of fixed and floating deck mid-sized walk-behind commercial mowers, featuring the same high performance Turboforce® deck technology used on the Toro zero-turn radius riding mowers. In fiscal 2006, we also introduced the Exmark Phazer™, a compact commercial zero-turn radius riding mower for landscape professionals with smaller properties unsuitable for larger commercial riders, and the Exmark FrontRunner™, a front mount commercial zero-turn radius riding mower with a hydraulic deck lift and fold for enhanced serviceability.

Our compact utility loaders are cornerstone products for the Toro Sitework Systems product line. These products are designed to improve efficiency in the creation of landscapes. We offer over

3

35 attachments for our compact utility loaders, including trenchers, augers, vibratory plows, and backhoes. In fiscal 2006, we introduced two new diesel-powered compact utility loaders.

Sports Fields and Grounds Market. Products for the sports fields and grounds market include riding rotary units with cutting widths ranging from 21 inches to 16 feet, aerators, attachments, and debris management products, which include versatile debris vacuums, blowers, and sweepers. Other products include multipurpose vehicles, such as the Workman®, that can be used for turf maintenance, towing, and industrial hauling. These products are sold through distributors, who then sell to owners and/or managers of sports fields, municipal and institutional properties, cemeteries, and facilities such as airports and corporate headquarters. In fiscal 2006, we introduced the Infield Pro® 3040 and 5040 infield groomers, featuring the new Quick Attachment System that provides attachment changes without the use of tools for most of the 17 attachments.

Residential/Commercial Irrigation Market. Turf irrigation products marketed under the Toro and Irritrol brand names include sprinkler heads, brass and plastic valves, and electric and hydraulic control devices designed to be used in residential and commercial turf irrigation systems. These products are professionally installed in new systems and can also be used to replace or retrofit existing systems. Most of the product line is designed for underground irrigation systems. Electric and hydraulic controllers activate valves and sprinkler heads in a typical irrigation system. We also offer wireless rain and freeze switches on some products in an effort to conserve water usage. Our IntelliSense™ and SmartDial™ controllers self-adjust their watering schedules based on current environment conditions. In fiscal 2006, we introduced the Irritrol® PC Control™ residential controller system, featuring wireless transmission of watering and landscape lighting schedules between a user’s personal computer and the irrigation controller.

Golf Course Market. Products for the golf course market include large reel and rotary riding products for fairway, rough and trim cutting; riding and walking mowers for putting greens and specialty areas; turf sprayer equipment; utility vehicles; turf aerators, including the ProCore® 648 walk-behind aerator; and bunker maintenance equipment. We also manufacture and market underground irrigation systems, including sprinkler heads and controllers that activate electric, battery-operated, or hydraulic valves. Our professional irrigation systems are designed to use computerized management systems and a variety of technologies to help customers manage their consumption of water. Our 835S/855S Series golf sprinklers are equipped with a unique TruJectory™ feature that provides enhanced water distribution control as well as uniformity, nozzle flexibility, and system efficiency. Our Network VP™ Satellite also provides an upgrade path to customers with existing controllers.

In fiscal 2006, we introduced four models to the all-new Reelmaster® 5010 Series of fairway mowers, featuring Dual Precision Adjustment cutting units, improved serviceability and comfort features, and an optional upgrade that enhances traction and climbing ability with the CrossTrax® all-wheel drive system. In fiscal 2006, we also introduced the Sand Pro® 3040 and 5040 professional golf course bunker management machines that feature the new Quick Attachment System that provides attachment changes without the use of tools for most of the Sand Pro’s 17 attachments. In fiscal 2006, we also introduced the Groundsmaster® 3280-D compact rotary mowers to our international markets.

Micro-Irrigation Market. Products for the micro-irrigation market include emission devices that regulate flow for drip irrigation, including Aqua-TraXX® drip tape, patented Aqua-TraXX® PC (pressure-compensating), Blue Stripe® polyethylene tubing, and Drip In® drip line, all used in agriculture, mining, and landscape applications. These products are sold primarily through dealers and distributors who then sell to end users for use primarily in vegetable fields, fruit and nut orchards, vineyards, and landscapes. In fiscal 2006, we introduced a product life-cycle management program that includes an industry-first recycling service and permanent identification for ease of installation.

Residential –  We market our residential products to homeowners through a variety of distribution channels, including dealers, hardware retailers, home centers, mass retailers, and over the Internet. These products are sold mainly in North America, Europe, and Australia, with the exception of snow removal products, which are sold primarily in North America and Europe. We also license our trade name to other manufacturers and retailers on certain products as a means of expanding our brand name presence.

Walk Power Mower Products. We manufacture and market numerous walk power mower models under our Toro and Lawn-Boy brand names, as well as the Pope brand name in Australia and the Hayter brand name in the United Kingdom. Models differ as to cutting width, type of starter mechanism, ability to mulch, bag or side discharge grass clippings, cast aluminum or steel decks, controls, and power sources, and are either self-propelled or push mowers. Toro brand lawn mowers are backed by our “Guaranteed To Start” program. We also offer a line of rear roller walk power mowers, a design that provides a striped finish for the United Kingdom market. In fiscal 2006, we introduced two models of the Eurocycler™, an electric mower designed exclusively for the European homeowner.

Riding Products. We manufacture and market riding products under the Toro and Lawn-Boy brand names and the Hayter brand name in the United Kingdom. Riding mowers and tractors include a rear engine riding mower manufactured and sold in the European market; lawn tractor models; and garden tractor models. Many models are available with a variety of decks and accessories.

4

Recycler cutting decks are available on some models. Models can be equipped with manual, automatic, or hydrostatic transmissions. In recent years, we introduced a new line of riding products, the TimeCutter® zero-turning radius riding mowers. In early fiscal 2007, we introduced four new models to the TimeCutter® line of zero-turning radius riding mowers, featuring larger engines and deck options and other enhancements designed to further reduce mowing time for homeowners. We also manufacture riding mower products plus attachments for a third party under a private label agreement. In fiscal 2006, we introduced the LX Series and GT2000 Series value-priced lawn and garden tractors to the North American market. In fiscal 2006, we also introduced a new D-Series lawn tractor to the European market, featuring a larger engine and improved comfort features.

Home Solutions Products. We design and market home solutions products under the Toro and Pope brand names, including electric and battery operated flexible line grass trimmers, electric blowers, electric blower-vacuums, and electric snow throwers. The versatile electric Power Shovel Plus is an innovative machine for every season that can clear snow up to six inches deep and sweep away dirt, leaves, and other debris from hard surfaces. In fiscal 2007, we introduced three new electric blower-vacuum models, featuring a more powerful air force and an improved flow rate.

Retail Irrigation Products. We design and market underground retail irrigation products under the Toro and Lawn Genie brand names. In Australia, we also design and market underground and hose-end retail irrigation products under the Pope brand name. These products are designed for homeowner installation and include sprinkler heads, valves, and electronic and mechanical timers. Our ECXTRA™ sprinkler timers can be used with a home computer and our Scheduling Advisor™ recommends the proper watering schedule based on the local weather, plant type, and sprinkler. We also design and market drip irrigation systems for residential landscapes and gardens.

Gas Snow Removal Products. We manufacture and market a range of gas-powered single-stage and two-stage snow thrower models under the Toro and Lawn-Boy brand names. Single-stage snow throwers are walk behind units with lightweight two-cycle gasoline engines. Most single-stage snow thrower models include Power Curve® snow thrower technology. Our large two-stage snow throwers are designed for relatively large areas of deep, heavy snow falls and use two- and four-cycle engines, and include a line of innovative models featuring the Power Max® auger system for enhanced performance and the Quick Stick® chute control technology. We also manufacture and market hybrid models with single-stage snow thrower technology that are self-propelling, providing the operational ease of a single-stage snow thrower with the power of a two-stage unit. In fiscal 2006, we introduced a new line of compact two-stage snow throwers.

Financial Information About Foreign Operations
and Business Segments

We manufacture our products in the United States, Mexico, Australia, Italy, and the United Kingdom for sale throughout the world and maintain sales offices in the United States, Belgium, the United Kingdom, France, Australia, Singapore, Japan, China, Italy, and Switzerland. New product development is pursued primarily in the United States. Our net sales outside the United States were 27.0 percent, 24.8 percent, and 20.7 percent of total consolidated net sales for fiscal 2006, 2005, and 2004, respectively.

A portion of our cash flow is derived from sales and purchases denominated in foreign currencies. To reduce the uncertainty of foreign currency exchange rate movements on these sales and purchase commitments, we enter into foreign currency exchange contracts for select transactions. For additional information regarding our foreign currency exchange contracts, see Item 7A entitled “Quantitative and Qualitative Disclosures about Market Risk.” For additional financial information regarding our foreign operations and each of our segments, see Note 11 of Notes to Consolidated Financial Statements entitled “Segment Data,” included in Item 8 of Part II of this report.

Manufacturing and Production

In some areas of our business, we are primarily an assembler, while in others we serve as a fully integrated manufacturer. We have strategically identified specific core manufacturing competencies for vertical integration and have chosen outside vendors to provide other services. We design component parts in cooperation with our vendors, contract with them for the development of tooling, and then enter into agreements with these vendors to purchase component parts manufactured using the tooling. In addition, our vendors regularly test new technologies to be applied to the design and production of component parts. Manufacturing operations include robotic and computer-automated equipment to speed production, reduce costs, and improve the quality, fit, and finish of products. Operations are also designed to be flexible enough to accommodate product design changes required to respond to market demand.

In order to utilize our manufacturing facilities and technology more effectively, we pursue continuous improvements in our manufacturing processes with the use of Lean methods, which are intended to streamline work and eliminate waste. We have some flexible assembly lines that can handle a wide product mix and deliver products when customers require them. Additionally, we spend considerable effort to reduce manufacturing costs through Lean methods and process improvement, product and platform design, application of advanced technology, enhanced environmental management systems, SKU consolidation, safety improvements, and better supply-chain management. We also manufacture products sold under a private label agreement to a third party on a competitive basis, and we have agreements with

5

other third party manufacturers to manufacture products on our behalf.

Our professional products are manufactured throughout the year. Our residential spring and summer products are also generally manufactured throughout the year. However, our residential fall and winter products are generally manufactured in the summer and fall months. Our products are tested in conditions and locations similar to those in which they are used. We use computer-aided design and manufacturing systems to shorten the time between initial concept and final production.

Our production levels and inventory management goals are based on estimates of demand for our products, taking into account production capacity, timing of shipments, and field inventory levels. We also periodically shut down production to allow for maintenance, rearrangement, and capital equipment installation at our manufacturing facilities. Capital expenditures for fiscal 2007 are expected to be approximately $45 to $50 million, which is $5 to $10 million higher than fiscal 2006 capital expenditures as we expect to continue to invest in manufacturing equipment and tooling for new products.

Engineering and Research

We are committed to an ongoing engineering program dedicated to developing innovative new products and improvements in the quality and performance of existing products. However, a focus on innovation also carries certain risks that new technology will be slow to be or not accepted by the marketplace. We attempt to mitigate this risk through our focus on and commitment to understanding our customers’ needs and requirements. We are investing more time upfront with customers, using “Voice of the Customer” tools to ensure we develop innovative products that will be valued by our customers. We are also utilizing Design for Manufacturing and Assembly (DFMA) tools and enhancing our New Product Development System to ensure early manufacturing involvement in new product designs to reduce product cost. DFMA focuses on reducing the number of parts required to assemble new products as well as designing products to move more efficiently through the manufacturing process. We are also making several improvements to our engineering process as part of our Lean initiatives.

Our engineering expenses are primarily incurred in connection with the development of new products that may have additional applications or represent extensions of existing product lines, improvements to existing products, and cost reduction efforts. Our expenditures for engineering and research were approximately $57.3 million (3.1 percent of net sales) in fiscal 2006, $52.6 million (3.0 percent of net sales) in fiscal 2005, and $48.0 million (2.9 percent of net sales) in fiscal 2004. In fiscal 2007, we anticipate engineering and research costs to increase compared to fiscal 2006 as we plan to continue to invest in new product development.

Raw Materials

Most of the components of our products are commercially available from a number of sources and are in adequate supply. Therefore, we are generally not dependent on any one supplier, except for engines from Japanese suppliers used in some of our professional segment products.

In fiscal 2006, we experienced no significant work stoppages as a result of shortages of raw materials or commodities. The highest value component costs are generally engines, steel, transmissions, transaxles, hydraulics, electric motors, and plastic resin purchased from several suppliers around the world. We have some long-term commitments for the purchase of various component parts and raw materials that management believes are unlikely to be terminated prematurely.

During fiscal 2006, we continued to experience an increase in commodity costs, which resulted in a negative impact on our gross margins and net earnings. We have offset and expect to continue to mitigate in part the impact of these increased costs through internal cost reduction efforts, vendor negotiations, alternative sourcing options, and by recovering a portion of these costs with price increases to customers.

Service and Warranty

Our products are warranted to ensure customer confidence in design, workmanship, and overall quality. Warranty length varies depending on whether product usage is for “residential” or “professional” applications within individual product lines. Some products have an over-the-counter exchange option and some have a 30-day satisfaction guarantee. Warranty coverage ranges from a period of six months to seven years, and generally covers parts, labor, and other expenses for non-maintenance repairs, provided operator abuse, improper use, or negligence did not necessitate the repair. An authorized Toro, Lawn-Boy, Hayter, or Exmark distributor or dealer must perform warranty work. Distributors, dealers, and contractors submit claims for warranty reimbursement and are credited for the cost of repairs, labor, and other expenses as long as the repairs meet our prescribed standards. Warranty expense is accrued at the time of sale based on, among other factors, historical claims experience by individual product lines. Warranty reserves are also accrued for major rework campaigns and product recalls. Service support outside of the warranty period is provided by independent Toro, Lawn-Boy, Hayter, or Exmark distributors and dealers at the customer’s expense. We also sell extended warranty coverage on select products for a prescribed period after the original factory warranty period expires.

Product Liability

We have rigorous product safety standards and work continually to improve the safety and reliability of our products. We monitor accidents and possible claims and establish liability estimates with respect to claims based on internal evaluations of the merits of

6

individual claims. We purchase excess insurance coverage for catastrophic product liability claims for incidents that exceed our self-insured retention levels.

Patents

We hold patents in the United States and foreign countries and apply for patents as applicable. Although we believe our patents are valuable and patent protection is beneficial, our patent protection does not deter or prevent competitors from attempting to develop similar products. We are not materially dependent on any one or more of our patents.

To prevent possible infringement of our patents by others, we periodically review competitors’ products. To avoid potential liability with respect to others’ patents, we regularly review certain patents issued by the U.S. Patent and Trademark Office and foreign patent offices. We believe these activities help us minimize our risk of being a defendant in patent infringement litigation. We are currently involved in patent litigation cases, both where we are asserting patents and where we are defending against charges of infringement. While the ultimate results of the current cases are unknown at this time, we believe that the outcome of these cases is unlikely to have a material effect on our consolidated financial results.

Seasonality

Sales of our residential products, which accounted for approximately 31 percent of total consolidated net sales in fiscal 2006, are seasonal, with sales of lawn and garden products occurring primarily between February and May, and sales of snow removal equipment occurring primarily between July and January. Opposite seasons in some global markets somewhat moderate this seasonality of residential product sales. Seasonality of professional product sales also exists, but is tempered because the selling season in the West Coast, Southern states, and our markets in the Southern hemisphere such as Australia, Latin America, and Asia continues for a longer portion of the year than in Northern regions of the world.

Overall, worldwide sales levels are historically highest in our fiscal second quarter and retail demand is generally highest in our fiscal third quarter. Typically, accounts receivable balances increase between January and April as a result of higher sales volumes and extended payment terms made available to our customers. Accounts receivable balances decrease between May and December when payments are received. Our financing requirements are subject to variations due to seasonal changes in working capital levels, which typically increase in the first half of our fiscal year and then decrease in the second half of our fiscal year. Seasonal cash requirements of our business are financed from operations and with our bank credit lines. Peak borrowing generally occurs between February and May.

The following table shows total consolidated net sales and net earnings for each quarter as a percentage of the total fiscal year.

Effects of Weather

From time to time, weather conditions in a particular region or market may adversely affect sales of some of our products and field inventory levels, and result in a negative impact on our future net sales. As the percentage of our net sales from outside the United States has continued to increase, our dependency on weather in any one part of the world has decreased. Nonetheless, weather conditions could materially affect our future net sales.

Distribution and Marketing

We market the majority of our products through approximately 50 domestic and 100 foreign distributors, as well as a number of hardware retailers, home centers, and mass retailers in more than 90 countries worldwide.

Toro and Lawn-Boy residential products, such as walk power mowers, riding products, and snow throwers, are sold to distributors, including Toro-owned distributors, for resale to retail dealers throughout the United States. Walk power mowers, snow throwers, and riding products are also sold directly to dealers, hardware retailers, home centers, and mass retailers. Home solutions products and retail irrigation products are primarily sold directly to home centers, mass retailers, hardware retailers, and dealers. We also sell selected residential products over the Internet, mainly through Internet retailers. Internationally, residential products are sold direct to retail dealers and mass merchandisers in Australia, Belgium, Canada, and the United Kingdom. In most other countries, products are mainly sold to distributors for resale to dealers and mass merchandisers.

Worldwide, professional products are sold mainly to distributors for resale to dealers, sports complexes, industrial facilities, contractors, municipalities, rental stores, and golf courses. We also sell some professional segment products directly to government customers and rental companies. Selected residential/commercial irrigation products are also sold directly to professional irrigation distributors. Compact utility loaders and attachments are sold directly to dealers and large rental companies. Beginning in fiscal 2006, we sold Exmark products direct to dealers in certain regions of the United States.

We currently own two domestic distribution companies. Our primary purposes in owning domestic distributorships are to facilitate ownership transfers while improving operations, and test

7

and deploy new strategies and business practices that could be replicated by our independent distributors. These distribution companies sell professional and residential products directly to retail dealers and customers in the United States and a majority of their revenues are derived from Toro-manufactured products.

Our distribution systems are intended to assure quality of sales and market presence as well as effective after-purchase service and support. We consider our distribution network to be a competitive advantage in marketing and selling our products.

Our current marketing strategy is to maintain distinct brands and brand identification for Toro®, Lawn-Boy®, Exmark®, Lawn Genie®, Irritrol®, Hayter®, and Pope® products.

We advertise our residential products during appropriate seasons throughout the year on television, radio, in print, and via the Internet. Professional products are advertised in print and through direct mail programs, as well as on the Internet. Most of our advertising emphasizes our brand names. Advertising is purchased by the company as well as through cooperative programs with distributors, dealers, hardware retailers, home centers, and mass retailers.

Customers

Overall, we believe that in the long-term we are not dependent on any single customer. However, The Home Depot accounted for greater than 10 percent of our total consolidated net sales in fiscal 2006, 2005, and 2004. The residential segment of our business is dependent on The Home Depot as a customer. While the loss of any substantial customer could have a material short-term impact on our business, we believe that our diverse distribution channels and customer base should reduce the long-term impact of any such loss.

Backlog of Orders

The approximate backlog of orders believed to be firm as of October 31, 2006 and 2005 was $120.6 million and $117.6 million, respectively, an increase of 2.5 percent. We expect the existing backlog of orders will be filled in early fiscal 2007.

Competition

Our products are sold in highly competitive markets throughout the world. The principal competitive factors in our markets are pricing, product innovation, quality and reliability, product support and customer service, warranty, reputation, distribution, shelf space, and financing options. Pricing has become an increasingly important competitive factor for a majority of our products. We believe we offer total solutions and full service packages with high quality products that have the latest technology and design innovations. Also, by selling our products through a network of distributors, dealers, hardware retailers, home centers, and mass retailers, we offer comprehensive service support during and after the warranty period. We compete in many product lines with numerous manufacturers, many of who have substantially greater financial resources than we do. We believe that we have a competitive advantage because we manufacture a broad range of product lines, we are committed to product innovation and customer service, we focus on Lean manufacturing methods, we have a strong focus in maintaining landscapes, and our distribution channels position us well to compete in various markets.

Internationally, residential segment products face more competition where foreign competitors manufacture and market products in their respective countries. We experience this competition primarily in Europe and Asia. In addition, fluctuations in the value of the U.S. dollar may affect the price of our products in foreign markets, thereby impacting their competitiveness. We provide pricing support to foreign customers, as needed, to remain competitive in international markets.

Environmental Matters and
Other Governmental Regulation

We are subject to a wide variety of federal, state, and other governmental laws, rules, and regulations. These laws, rules, and regulations may affect the way we conduct our operations, and failure to comply with these regulations could lead to fines and other penalties. We are also involved in the evaluation and clean-up of a limited number of properties currently and previously owned. We do not expect that these matters will have a material adverse effect on our consolidated financial position or results of operations.

The European Union (EU) has adopted the following environmental directives: Waste Electrical and Electronic Equipment (WEEE) and Restriction on the use of Hazardous Substances (RoHS). Both directives are being transposed into legislation of the 25 EU member states. The WEEE directive mandates the labeling, collection, and disposal of electrical and electronic equipment. The RoHS directive bans the sale of electrical and electronic equipment containing certain hazardous substances, such as lead, mercury, chromium, cadmium, and brominated-flame retardants. We believe that we are in substantial compliance with these regulations.

The United States Environmental Protection Agency (EPA) and the California Air Resources Board (CARB) have adopted emission regulations setting maximum emission standards for certain off-road equipment. New engine emission regulations are being phased in by the federal government and the State of California. Our products are also subject to international laws and regulations related to emissions in places where we sell our products outside the United States. We are currently unable to predict the ultimate impact of the adopted and proposed regulations on our business.

Our residential products are subject to various United States statutes designed to protect consumers and are subject to the administrative jurisdiction of the Consumer Product Safety Commission. We are also subject to international, federal and state

8

environmental, occupational safety, transportation, and other regulations. We believe we are in substantial compliance with all such regulations, of which none has had a material adverse effect on our operations or business.

Customer Financing

Wholesale Financing – Toro Credit Company, our wholly owned finance subsidiary, provides financing for select products we manufacture for North American Toro distributors and approximately 200 selected U.S. dealers. Toro Credit Company purchases select receivables from us and our distributors for extended periods that assist the distributors and dealers to carry representative inventories of equipment. Down payments are not required and, depending on the finance program for each product line, finance charges are incurred by us, shared between us and the distributor and/or the dealer, or paid by the distributor or dealer. A security interest is retained in the distributors’ and dealers’ inventories, and periodic physical checks are made of those inventories. Terms to the distributors and dealers require payment as the equipment, which secures the indebtedness, is sold to customers, or when payment terms become due, whichever occurs first. Rates are based on prime rate plus a fixed percentage that differs based on whether the financing is for a distributor or dealer. Rates may also vary based on the product that is financed.

Independent Toro dealers that do not finance through Toro Credit Company finance their inventories with third party sources. The finance charges represent interest for a pre-established length of time based on a predefined rate by a contract with third party financing sources. Exmark and some international products sold through dealers are financed primarily with third party financing sources or by the distributor.

End-User Financing – We have agreements with a third party financing company to provide lease-financing options to golf course and sports fields and grounds equipment customers and micro-irrigation customers in North America and Europe. The purpose of these agreements is to increase sales by giving buyers of our products alternative financing options when purchasing our products.

We also have a multi-year agreement with a third party financing company to provide financing programs under a private label program in the U.S. This program, offered primarily to Toro and Exmark dealers, provides end-user customers a revolving line of credit for Toro and Exmark products, parts, and services.

Distributor Financing – We enter into long-term loan agreements with some distributors. These transactions are used for expansion of the distributors’ businesses, acquisitions, refinancing working capital agreements, or ownership changes.

Employees

During fiscal 2006, we employed an average of 5,343 employees. The total number of employees as of October 31, 2006 was 5,262. We consider our employee relations to be good. Three collective bargaining agreements cover approximately 16 percent of these employees. These three agreements expire in October 2007, October 2008, and May 2009. From time to time, we also retain consultants, independent contractors, and temporary and part-time workers.

Available Information

Filings with the SEC – We are a reporting company under the Securities Exchange Act of 1934, as amended, and file reports, proxy statements, and other information with the Securities and Exchange Commission (SEC). Copies of these reports, proxy statements, and other information can be inspected and copied at the SEC’s Public Reference Room at 100 F Street N.E., Room 1580, Washington, D.C. 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. Because we make filings to the SEC electronically, you may also access this information from the SEC’s home page on the Internet at http://www.sec.gov.

We make available, free of charge on our Internet web site www.thetorocompany.com, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements on Schedule 14A, amendments to those reports, and other documents filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. The information contained on our web site or connected to our web site is not incorporated by reference into this Annual Report on Form 10-K and should not be considered part of this report.

Corporate Governance – We have a Code of Ethics for the CEO and Senior Financial Officers and a Code of Conduct for all employees. Copies of these codes are posted on our website at www.thetorocompany.com — select the “Investor Information” link and then the “Corporate Governance” link. If we amend or grant any waivers to the code that are applicable to our executive officers, which we do not anticipate doing, we have committed that we will post the amendments or waivers on our website under “Corporate Governance.”

We also make available, free of charge on our web site www.thetorocompany.com (select the “Investor Information” link and then the “Corporate Governance” link) and in print to any stockholder who requests, our corporate governance guidelines and the charters of our Audit Committee, Compensation and Human Resources Committee, and Nominating and Governance Committee of our Board of Directors. Requests for copies can be directed to Investor Relations, telephone: 952-887-7141.

9

We have furnished to the SEC the required certifications under Section 302 of the Sarbanes-Oxley Act of 2002 regarding the quality of our public disclosures as Exhibits 31(a) and 31(b) to this report. We have filed with the New York Stock Exchange (NYSE) the CEO certification regarding our compliance with the NYSE’s corporate governance listing standards as required by NYSE Rule 3030A.12(a) on March 17, 2006.

Forward-Looking Statements

This Annual Report on Form 10-K contains, or incorporates by reference, not only historical information, but also forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and that are subject to the safe harbor created by those sections. In addition, we or others on our behalf may make forward-looking statements from time to time in oral presentations, including telephone conferences and/or web casts open to the public, in press releases or reports, on our Internet web sites or otherwise. Statements that are not historical are forward-looking and reflect expectations and assumptions. We try to identify forward-looking statements in this report and elsewhere by using words such as “expect”, “looking ahead”, “anticipate”, “plan”, “estimate”, “believe”, “should”, “may”, “intend”, and similar expressions. Our forward-looking statements generally relate to our future performance, including our anticipated operating results and liquidity requirements, our business strategies and goals, and the effect of laws, rules, regulations as well as new accounting pronouncements and outstanding litigation, on our business, operating results, and financial condition.

Forward-looking statements involve risks and uncertainties. These risks and uncertainties include factors that affect all businesses operating in a global market as well as matters specific to Toro. The most significant factors known to us that could materially adversely affect our business, operations, industry, financial position, or future financial performance are described later in this report under the heading entitled “Item 1A. Risk Factors.” We wish to caution readers not to place undue reliance on any forward-looking statement which speaks only as of the date made and to recognize that forward-looking statements are predictions of future results, which may not occur as anticipated. Actual results could differ materially from those anticipated in the forward-looking statements and from historical results, due to the risks and uncertainties described elsewhere in this report, including under the heading entitled “Item 1A. Risk Factors,” as well as others that we may consider immaterial or do not anticipate at this time. The risks and uncertainties described in this report, including those under the heading entitled “Item 1A. Risk Factors,” are not exclusive and further information concerning our company and our businesses, including factors that potentially could materially affect our financial results or condition, may emerge from time to time.

We assume no obligation to update forward-looking statements to reflect actual results or changes in factors or assumptions affecting such forward-looking statements. We advise you, however, to consult any further disclosures we make on related subjects in our future quarterly reports on Form 10-Q and current reports on Form 8-K that we file with or furnish to the Securities and Exchange Commission.

10

item 1A. Risk factors

The following are significant factors known to us that could materially adversely affect our business, operations, industry, financial position, or future financial performance.

Changes in economic conditions in the United States and around the world could adversely affect our net sales.

The demand for our products is dependent upon economic conditions, including but not limited to economic growth rates; slow downs or reductions in home ownership, construction, and home sales; consumer spending levels; employment rates; interest rates; inflation; and consumer confidence in the United States and the foreign economies in which we conduct business. Inflationary pressures, higher fuel prices, and higher short-term and mortgage interest rates could cause consumers to reduce spending, which could have an adverse effect on our net sales and earnings.

Increases in the cost and availability of raw materials and components that we purchase and increases in our other costs of doing business, such as transportation costs, may adversely affect our profit margins and business.

We purchase raw materials, such as steel, fuel, petroleum-based resins, and other commodities, and components, such as engines, transmissions, transaxles, hydraulics, and electric motors, for use in our products. Increases in the cost of such raw materials and components may adversely affect our profit margins if we are unable to pass along any cost increases in the form of price increases or otherwise reduce our cost of goods sold. In the past, the benefits from our Lean manufacturing initiative, as well as the implementation of other productivity improvement initiatives and price increases on some of our products, have offset a portion of increased raw material and component costs. However, we cannot commit that we will be able to continue to do so in the future. Although most of the raw materials and components of our products are commercially available from a number of sources and in adequate supply, any disruption in the availability of such raw materials and components, our inability to obtain substitutes for such items, or any deterioration in our relationships with our suppliers could adversely affect our business. Increases in our other costs of doing business may also adversely affect our profit margins and business. For example, an increase in fuel costs may also result in an increase in our transportation costs, which also could adversely affect our operating results and business.

Weather conditions may reduce demand for some of our products and adversely affect our net sales.

From time to time, weather conditions in a particular region or market may adversely affect sales of some of our products and field inventory levels. For example, in the past, drought conditions have had an adverse effect on sales of certain mowing equipment products, unusually rainy weather or severe drought conditions that result in watering bans have had an adverse effect on sales of our irrigation products, and lower snow fall accumulations have had an adverse effect on sales of our snow thrower products.

Our professional segment net sales are dependent upon the level of growth in the residential and commercial construction markets, growth of homeowners’ outsourcing lawn care, the amount of investment in golf course renovations and improvements, new golf course development, and the amount of government spending.

Our professional segment products are sold by distributors or dealers, or sold directly to government customers, rental companies, and professional users engaged in maintaining and creating landscapes, such as golf courses, sports fields, municipal properties, and residential and commercial landscapes. Our professional segment net sales, therefore, are dependent upon the level of growth in residential and commercial construction markets, growth of homeowners’ outsourcing lawn care, the amount of investment in golf course renovations and improvements, new golf course construction, and the amount of government spending. Reduced tax revenue, increased expenses, and tighter government budgets generally result in reduced government spending for grounds maintenance equipment, which could have an adverse effect on our professional segment net sales. In addition, a slow rate of growth in golf rounds played that impacts revenue for golf courses could adversely affect our sales of golf course equipment and irrigation products.

Our residential segment net sales are dependent upon the amount of product placement at retailers, changing buying patterns of customers, and The Home Depot, Inc. as a major customer.

The elimination or reduction of shelf space assigned to our products by retailers could adversely affect our residential segment net sales. Our residential segment net sales are also dependent upon changing buying patterns of customers. For example, in the last decade, there has been a trend away from purchases at dealer outlets and hardware retailers to price and value sensitive purchases at home centers and mass retailers. This trend has resulted in a demand for residential products purchased at retailers, such as The Home Depot, which accounted for a greater percentage of our net sales in the past few fiscal years compared

11

to our net sales during and prior to the 1990’s. The Home Depot accounted for greater than 10 percent of our total consolidated net sales in fiscal 2006, 2005, and 2004. We believe that our diverse distribution channels and customer base should reduce the impact on us if we were to lose The Home Depot or any other substantial customer. However, the loss of any substantial customer or a significant reduction in sales to The Home Depot or other customers could have a material impact on our business and operating results. Changing buying patterns of customers also could result in reduced sales of one or more of our residential segment products, resulting in increased inventory levels. Although our residential spring and summer products are generally manufactured throughout the year, our residential fall and winter products are generally manufactured in the summer and fall months. Our production levels and inventory management goals are based on estimates of demand for our products, taking into account production capacity, timing of shipments, and field inventory levels. If we overestimate or underestimate demand during a given season, we may have excess or insufficient inventories.

If we are unable to continue to enhance existing products and develop and market new products that respond to customer needs and achieve market acceptance, we may experience a decrease in demand for our products, and our business could suffer.

One of our growth strategies is to develop innovative, customer-valued products to generate revenue growth. Our sales from new products in the past have represented a significant component of our net sales and are expected to continue to represent a significant component of our future net sales. We may not be able to compete as effectively with our competitors, and ultimately satisfy our customers, unless we can continue to enhance existing products and develop new innovative products in the markets in which we compete. Product development requires significant financial, technological, and other resources. Although in the past we have implemented Lean manufacturing and other productivity improvement initiatives to provide investment funding for new products, we cannot be certain that we will be able to continue to do so in the future. Product improvements and new product introductions also require significant planning, design, development, and testing at the technological, product, and manufacturing process levels and we may not be able to timely develop product improvements or new products. Our competitors’ new products may beat our products to market, may be more effective with more features and/or less expensive than our products or render our products obsolete. Any new products that we may develop may not receive market acceptance or otherwise generate any meaningful net sales or profits for us relative to our expectations, based on, among other things, existing and anticipated investments in manufacturing capacity and commitments to fund advertising, marketing, promotional programs, and research and development.

We face intense competition in all of our product lines with numerous manufacturers, including from some that have greater financial and other resources than we do. We may not be able to compete effectively against competitors’ actions, which could harm our business and operating results.

Our products are sold in highly competitive markets throughout the world. Principal competitive factors in our markets include pricing, product innovation, quality and reliability, product support and customer service, warranty, reputation, distribution, shelf space, and financing options. We compete in all of our product lines with numerous manufacturers, some who have substantially greater financial, marketing, and other resources than we do. As a result, they may be able to adapt more quickly to new or emerging technologies and changes in customer requirements, or to devote greater resources to the promotion and sale of their products than we can. In addition, competition could increase if new companies enter the market or if existing competitors expand their product lines or intensify efforts within existing product lines. Our current products, products under development, and our ability to develop new and improved products may be insufficient to enable us to compete effectively with our competitors. Internationally, our residential segment products typically face more competition where foreign competitors manufacture and market products in their respective countries. We experience this competition primarily in Europe and Asia. In addition, fluctuations in the value of the U.S. dollar may affect the price of our products in foreign markets, thereby impacting their competitiveness. Pricing has become an increasingly important competitive factor for many of our products. We may not be able to compete effectively against competitors’ actions, which could harm our business and operating results.

A significant percentage of our consolidated net sales is generated outside of the United States, and we intend to continue to expand our international operations. Our international operations require significant management attention and financial resources, expose us to difficulties presented by international economic, political, legal, accounting, and business factors, and may not be successful or produce desired levels of net sales.

We manufacture our products in the United States, Mexico, Australia, the United Kingdom, and Italy for sale throughout the world and maintain sales offices in the United States, Belgium, the United Kingdom, France, Australia, Singapore, Japan, China, Italy, and Switzerland. Our net sales outside the United States were 27.0 percent, 24.8 percent, and 20.7 percent of our total

12

consolidated net sales for fiscal 2006, 2005, and 2004, respectively. International markets have in the past and will continue to be a focus for us to grow our revenues. For example, in February 2005, we completed the acquisition of certain assets and assumed certain liabilities of Hayter Limited, a company located in the United Kingdom that designs, manufactures, and markets residential and professional turf maintenance equipment, primarily for the United Kingdom market. We believe many opportunities exist in the international markets, and our goal is for international net sales to comprise a larger percentage of our total consolidated net sales. The expansion of our existing international operations and entry into additional international markets requires significant management attention and financial resources. Many of the countries in which we sell our products or otherwise have an international presence are, to some degree, subject to political, economic, and/or social instability. Our international operations expose us and our representatives, agents, and distributors to risks inherent in operating in foreign jurisdictions. These risks include:

·       increased costs of customizing products for foreign countries;

·       difficulties in managing and staffing international operations and increases in infrastructure costs including legal, tax, accounting, and information technology;

·       the imposition of additional U.S. and foreign governmental controls or regulations; new trade restrictions and restrictions on the activities of foreign agents, representatives, and distributors; and the imposition of increases in costly and lengthy export licensing requirements, customs duties and tariffs, license obligations, and other non-tariff barriers to trade;

·       the imposition of U.S. and/or international sanctions against a country, company, person, or entity with whom we do business that would restrict or prohibit our continued business with the sanctioned country, company, person, or entity;

·       international pricing pressures;

·       laws and business practices favoring local companies;

·       adverse currency exchange rate fluctuations;

·       longer payment cycles and difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;

·       difficulties in enforcing or defending intellectual property rights; and

·       multiple, changing, and often inconsistent enforcement of laws, rules, and regulations, including, in particular, rules relating to environmental, health, and safety matters.

Our operations in other countries may not produce desired levels of net sales or one or more of the factors listed above may harm our business and operating results. Any material decrease in our international sales or profitability could also adversely impact our operating results.

Fluctuations in foreign currency exchange rates could result in declines in our reported net sales and net earnings.

Because the functional currency of our foreign operations is the applicable local currency, we are exposed to foreign currency exchange rate risk arising from transactions in the normal course of business, such as sales and loans to wholly owned subsidiaries as well as sales to third party customers, purchases from suppliers, and bank lines of credit with creditors denominated in foreign currencies. Our reported net sales and net earnings are subject to fluctuations in foreign exchange rates. Because our products are manufactured or sourced primarily from the United States, a stronger U.S. dollar generally has a negative impact on results from operations outside the United States while a weaker dollar generally has a positive effect. Our primary exchange rate exposure is with the Euro, the Australian dollar, the Canadian dollar, the British pound, the Mexican peso, and the Japanese yen against the U.S. dollar. While we actively manage the exposure of our foreign currency market risk in the normal course of business by entering into various foreign exchange contracts, these instruments may not effectively limit our underlying exposure from currency fluctuations or minimize our net earnings and cash volatility associated with foreign currency exchange rate changes.

We manufacture our products at and distribute our products from several locations in the United States and internationally. Any disruption at any of these facilities or our inability to cost-effectively expand existing and move production between manufacturing facilities could adversely affect our business and operating results.

We manufacture most of our products at seven locations in the United States, two locations in Mexico, and one location in each of Australia, Italy, and the United Kingdom. We also have several locations that serve as distribution centers, warehouses, test facilities, and corporate offices. Our facilities may be affected by natural or man-made disasters. In the event one of our manufacturing facilities was affected by a disaster, we could be forced to shift production to one of our other manufacturing facilities. Although we purchase insurance for damage to our property and disruption of our business from casualties, such insurance may not be sufficient to cover all of our potential losses. Any disruption in our manufacturing capacity could have an adverse impact on our ability to produce sufficient inventory of our products or may require us to incur additional expenses in order to produce sufficient inventory, and therefore may adversely affect our net sales and operating results. Any disruption or delay at our manufacturing facilities, including a strike at any one of our three facilities operating under a collective bargaining agreement or the failure to renew or enter into a new collective bargaining agreement, could impair our ability to meet the demand of our

13

customers and our customers may cancel orders or purchase products from our competitors, which could adversely affect our business and operating results. Our operating results may also be adversely affected if we are unable to cost-effectively expand existing and move production between manufacturing facilities as needed from time to time.

We intend to grow our business through additional acquisitions and alliances, stronger customer relations, and new partnerships, which are risky and could harm our business.

One of our growth strategies is to drive growth in our businesses and accelerate opportunities to expand our global presence through targeted acquisitions, alliances, stronger customer relations, and new partnerships that complement our existing brands and product portfolio. In February 2005, we completed the acquisition of certain assets and assumed certain liabilities of Hayter Limited in the United Kingdom. The benefits of an acquisition or new partnership may take more time than expected to develop or integrate into our operations, and we cannot guarantee that our Hayter acquisition or any future acquisitions, alliances, or joint ventures will in fact produce any benefits. In addition, acquisitions, alliances, joint ventures, and partnerships involve a number of risks, including:

·       diversion of management’s attention;

·       difficulties in assimilating the operations and products of an acquired business or in realizing projected efficiencies, cost savings, and synergies;

·       potential loss of key employees or customers of the acquired businesses or adverse effects on existing business relationships with suppliers and customers;

·       adverse impact on overall profitability if acquired businesses do not achieve the financial results projected in our valuation models;

·       reallocation of amounts of capital from other operating initiatives and/or an increase in our leverage and debt service requirements to pay the acquisition purchase prices, which could in turn restrict our ability to access additional capital when needed or to pursue other important elements of our business strategy;

·       inaccurate assessment of undisclosed, contingent or other liabilities or problems, unanticipated costs associated with an acquisition, and an inability to recover or manage such liabilities and costs; and

·       incorrect estimates made in the accounting for acquisitions, incurrence of non-recurring charges, and write-off of significant amounts of goodwill or other assets that could adversely affect our operating results.

Our ability to grow through acquisitions will depend, in part, on the availability of suitable acquisition candidates at an acceptable price, our ability to compete effectively for these acquisition candidates, and the availability of capital and personnel to complete such acquisitions and run the acquired business effectively. These risks could be heightened if we complete a large acquisition or several acquisitions within a relatively short period of time. In addition, some acquisitions may require the consent of the lenders under our credit agreements. We cannot predict whether such approvals would be forthcoming or the terms on which the lenders would approve such acquisitions. Any potential acquisition could impair our operating results.

We rely on our management information systems for inventory management, distribution, and other functions. If our information systems fail to adequately perform these functions or if we experience an interruption in their operation, our business and operating results could be adversely affected.

The efficient operation of our business is dependent on our management information systems. We rely on our management information systems to effectively manage accounting and financial functions, manage manufacturing and supply chain processes, and maintain our research and development data. The failure of our management information systems to perform properly could disrupt our business and product development and could result in decreased sales, increased overhead costs, excess inventory, and product shortages, causing our business and operating results to suffer. In addition, our management information systems, including our computer systems, Internet web sites, telecommunications, and data networks, are vulnerable to damage or interruption from natural or man-made disasters, terrorist attacks and attacks by computer viruses or hackers, or power loss. Any such interruption could adversely affect our business and operating results.

A significant portion of our net sales are financed by third parties. Some Toro dealers and Exmark distributors and dealers finance their inventories with third party financing sources. The termination of our agreements with these third parties, any material change to the terms of our agreements with these third parties or in the availability or terms of credit offered to our customers by these third parties, or any delay in securing replacement credit sources, could adversely affect our sales and operating results.

Some Toro and Lawn-Boy dealers and Exmark distributors and dealers generally finance their inventories with third party financing companies. These third party financing companies purchase select receivables from us and our distributors and dealers for extended periods that assist our distributors and dealers in carrying representative inventories of our products. We also have agreements with third party financing companies to provide financing options to golf course and sports fields and grounds

14

equipment customers and micro-irrigation customers in North America and Europe. The purpose of these agreements is to increase our net sales by giving buyers of our products alternative financing options when purchasing our products. We also have an agreement with a third party financing company to provide financing programs under a private label program offered primarily to Toro, Lawn-Boy, and Exmark dealers that provides our end-user customers a revolving line of credit for Toro and Exmark products, parts, and services. Termination of our agreements with these third parties, any material change to the terms of our agreements with these third parties or in the availability or terms of credit for our customers from these third parties, or any delay in securing replacement credit sources, could adversely affect our operating results.

Our reliance upon patents, trademark laws, and contractual provisions to protect our proprietary rights may not be sufficient to protect our intellectual property from others who may sell similar products.

We hold patents relating to various aspects of our products and believe that proprietary technical know-how is important to our business generally as well as many of our products. Proprietary rights relating to our products are protected from unauthorized use by third parties only to the extent that they are covered by valid and enforceable patents or are maintained in confidence as trade secrets. We cannot be certain that we will be issued any patents from any pending or future patent applications owned by or licensed to us or that the claims allowed under any issued patents will be sufficiently broad to protect our technology. In the absence of enforceable patent protection, we may be vulnerable to competitors who attempt to copy our products or gain access to our trade secrets and know-how. Our competitors may initiate litigation to challenge the validity of our patents, or they may use their resources to design comparable products that do not infringe our patents. We may incur substantial costs if our competitors initiate litigation to challenge the validity of our patents, or if we initiate any proceedings to protect our proprietary rights, and if the outcome of any such litigation is unfavorable to us, our business and operating results could be adversely affected. There may also be pending or issued patents held by parties not affiliated with us that relate to our products or technologies, and we may need to acquire licenses to any such patents to continue selling some or all of our products. If we had to obtain any such license in order to be able to continue to sell some or all of our products, we may not be able to do so on terms that were favorable to us, if at all.

In addition, we rely on trade secrets and proprietary know-how that we seek to protect, in part, by confidentiality agreements with our employees and consultants. These agreements may be breached, and we may not have adequate remedies for any such breach. Even if these confidentiality agreements are not breached, our trade secrets may otherwise become known or be independently developed by competitors.

Our business, properties, and products are subject to governmental regulation with which compliance may require us to incur expenses or modify our products or operations and may expose us to penalties for non-compliance. Governmental regulation may also adversely affect the demand for some of our products and our operating results.

Our business, properties, and products are subject to a wide variety of international, federal, state and local laws, rules and regulations relating to the protection of the environment, natural resources, and worker and product user health and safety, and the use, management, storage, and disposal of hazardous substances, wastes, and other regulated materials. These laws, rules, and regulations may affect the way we conduct our operations, and the failure to comply with these regulations could lead to fines and other penalties. Because we own and lease real property, various environmental laws also may impose liability on us for the costs of cleaning up and responding to hazardous substances that may have been released on our property, including releases unknown to us. These environmental laws and regulations also could require us to pay for environmental remediation and response costs at third-party locations where we disposed of or recycled hazardous substances. We are currently involved in the evaluation and clean-up of a limited number of properties we either currently or previously owned. Although we do not expect that these current matters will have a material adverse effect on our consolidated financial position or operating results, our future costs of complying with the various environmental requirements, as they now exist or may be altered in the future, could adversely affect our financial condition and operating results. We are also subject to other international, federal and state laws, rules and regulations, the future non-compliance with which may harm our business or may adversely affect the demand for some of our products. For example, our residential products are subject to various United States statutes designed to protect consumers and are subject to the administrative jurisdiction of the Consumer Product Safety Commission. The United States Environmental Protection Agency and California Air Resources Board adopted emissions regulations setting maximum emission standards for certain off-road equipment. The European Union also adopted environmental directives that mandate the labeling, collection, and disposal of electrical and electronic equipment and bans the sale of electrical and electronic equipment containing certain hazardous substances. In addition, governmental restrictions placed on water usage as well as water availability may adversely affect demand for our irrigation products. Changes in laws and regulations, including changes in accounting standards, taxation changes, including tax rate changes, new tax

15

laws, and revised tax law interpretations, also may adversely affect our operating results.

We are subject to product liability claims, product quality issues, and other litigation from time to time that could adversely affect our operating results or financial condition.

The manufacture, sale, and usage of our products expose us to significant risk of product liability claims. If a product liability claim or series of claims is brought against us for uninsured liabilities or in excess of our insurance coverage and it is ultimately determined that we are liable, our business could suffer. While we instruct our customers on the proper usage of our products, we cannot ensure that they will implement our instructions accurately. If our products are defective or used incorrectly by our customers, injury may result and this could give rise to product liability claims against us. Any losses that we may suffer from any liability claims, and the effect that any product liability litigation may have upon the reputation and marketability of our products, may divert management’s attention from other matters and may have a negative impact on our business and operating results. Some of our products or product improvements were developed relatively recently and defects or risks that we have not yet identified may give rise to product liability claims. Additionally, we could experience a material design or manufacturing failure in our products, a quality system failure, other safety issues or heightened regulatory scrutiny that could warrant a recall of some of our products. A recall of some of our products could also result in increased product liability claims. Unforeseen product quality problems in the development and production of new and existing products could also result in loss of market share, reduced sales, and higher warranty expense.

We are also subject to other litigation from time to time that could adversely affect our operating results or financial condition. For example, we are currently one of nine defendants in a purported class action in which the plaintiffs are alleging that the horsepower labels on the products the plaintiffs purchased were inaccurate. The amended complaint asserts violations of the federal Racketeer Influenced and Corrupt Organizations (RICO) Act and statutory and common law claims arising from the laws of 48 states. The amended complaint seeks an injunction, unspecified compensatory and punitive damages, treble damages under the RICO Act, and attorneys’ fees. Even if the plaintiffs’ claims are found to be without merit, we have incurred and may continue to incur substantial costs in defending the lawsuit. The lawsuit could divert the time and attention of our management and could result in adverse publicity, either of which could significantly harm our operating results and financial condition. Although we are currently unable to assess whether the litigation would have a material adverse effect on our consolidated operating results or financial condition, any adverse determination in the litigation might result in material liability, which could adversely impact our operating results and financial condition.

If we are unable to retain our key employees and attract and retain other qualified personnel, we may not be able to meet strategic objectives and our business could suffer.

Our ability to meet our strategic objectives and otherwise grow will depend to a significant extent on the continued contributions of our senior management team. Our future success will also depend in large part on our ability to identify, attract, and retain other highly qualified managerial, technical, sales and marketing, and customer service personnel. Competition for these individuals is intense, and we may not succeed in identifying, attracting, or retaining qualified personnel. The loss or interruption of services of any of our key personnel, the inability to identify, attract, or retain qualified personnel in the future, delays in hiring qualified personnel, or any employee slowdowns, strikes, or similar actions could make it difficult for us to conduct and manage our business and meet key objectives, which could harm our business, financial condition, and operating results.

Our business is subject to a number of other miscellaneous risks that may adversely affect our operating results, financial condition, or business.

Other miscellaneous risks that could affect our business include:

·       natural or man-made disasters, which may result in shortages of raw materials, higher fuel costs, and increase in insurance premiums;

·       financial viability of distributors and dealers, changes in distributor ownership, our success in partnering with new dealers, and our customers’ ability to pay amounts owed to us; and

·       continued threat of terrorist acts and war, which may result in heightened security and higher costs for import and export shipments of components or finished goods, reduced leisure travel, and contraction of the U.S. and worldwide economies.

ITEM 1B. UNRESOLVED SEC STAFF COMMENTS

None.

16

item 2.            Properties

As of October 31, 2006, we utilized manufacturing, distribution, warehouse, and office facilities totaling approximately 5.1 million square feet of space. We also utilize approximately 20 acres of land in California as a testing facility, 16 acres of land in Nebraska as a parking lot and testing facility, and 36 acres of land in Minnesota as a testing and storage facility. Plant utilization varies during the year depending on the production cycle. We consider each of our current facilities in use to be in good operating condition and adequate for its present use. Management believes we have sufficient manufacturing capacity for fiscal 2007. The following schedule outlines our significant facilities by location, ownership, and function as of October 31, 2006:

Item 3.            Legal Proceedings

We are a party to litigation in the ordinary course of business. Litigation occasionally involves claims for punitive as well as compensatory damages arising out of the use of our products. We are also subject to administrative proceedings with respect to claims involving the discharge of hazardous substances into the environment. Some of these claims assert damages and liability for remedial investigations and clean up costs. We are also typically involved in commercial disputes, employment disputes, and patent litigation cases in the ordinary course of business, both as a plaintiff and as a defendant. While the ultimate results of the current cases are unknown at this time, we believe that the outcome of these cases is unlikely to have a materially adverse effect on our consolidated operating results or financial condition. Further, although we are self-insured to some extent, we maintain insurance against certain product liability losses.

On June 3, 2004, eight individuals who claim to have purchased lawnmowers in Illinois and Minnesota filed a lawsuit in Illinois state court against the company and eight other defendants alleging that the horsepower labels on the products the plaintiffs purchased were inaccurate. On May 17, 2006, the plaintiffs filed an amended complaint to add 84 additional plaintiffs and an engine manufacturer as an additional defendant. The amended complaint asserts violations of the federal Racketeer Influenced and Corrupt Organizations (RICO) Act and statutory and common law claims arising from the laws of 48 states. The plaintiffs seek certification of a class of all persons in the United States who, beginning January 1, 1994 through the present purchased a lawnmower containing a two stroke or four stroke gas combustible engines up to 30 horsepower that was manufactured or sold by the defendants. The amended complaint seeks an injunction, unspecified compensatory and punitive damages, treble damages under the RICO Act and attorneys’ fees. In late May 2006, the case was removed to Federal court in the Southern District of Illinois. On August 1, 2006, all of the defendants, except MTD Products Inc., filed motions to dismiss claims in the amended complaint. On August 4, 2006, the plaintiffs filed a motion for preliminary approval of a settlement agreement with MTD Products Inc. and certification of a settlement class. All remaining non-settling defendants have filed counterclaims against MTD Products Inc. for potential contribution amounts and MTD Products Inc. has filed cross claims against the non-settling defendants. A court hearing on the defendants’ motions to dismiss and the plaintiffs’ motion for preliminary approval of the settlement agreement and certification of a settlement class was held on August 29, 2006. As of December 22, 2006, the court has not yet ruled on these motions. On December 21, 2006, one of the defendants, American Honda Motor Company, notified us that it had reached an agreement of settlement with the plaintiffs. We continue to evaluate this lawsuit and are unable to reasonably

17

estimate the likelihood of loss or the amount or range of potential loss that could result from this litigation. Therefore, no accrual has been established for potential loss in connection with this lawsuit. We are also unable to assess at this time whether the lawsuit will have a material adverse effect on our annual consolidated operating results or financial condition, although an unfavorable resolution could be material to our consolidated operating results for a particular period.

ITEM 4.            SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

No matters were submitted to a vote of security holders during the fourth quarter of fiscal 2006.

EXECUTIVE OFFICERS OF THE REGISTRANT

The list below identifies those persons designated as executive officers of the company, including their age and position with the company as of December 15, 2006 and positions held by them during the last five or more years. Officers are elected by the Board of Directors or appointed by the Chief Executive Officer annually. All executive officers listed below are subject to Section 16 under the Securities Exchange Act of 1934, as amended.

18

There are no family relationships between any director, executive officer or person nominated to become a director or executive officer of the company. There are no arrangements or understandings between any executive officer and any other person pursuant to which he or she was selected as an officer of the company.

PART II

Item 5.            Market for Registrant’s Common Equity, Related Stockholder Matters, and issuer purchases of equity securities

Toro common stock is listed for trading on the New York Stock Exchange and trades under the symbol “TTC.” The high, low, and last sales prices for Toro common stock and cash dividends paid for each of the quarterly periods for fiscal 2006 and 2005 were as follows:

1    Per share data and sales prices have been adjusted for all periods presented to reflect a two-for-one stock split effective March 28, 2005.

2    Future cash dividends will depend upon the company’s financial condition, capital requirements, results of operations, and other factors deemed relevant by the Board of Directors.

Common Stock – 100,000,000 shares authorized, $1.00 par value, 40,355,714 and 41,898,463 shares outstanding as of October 31, 2006 and 2005, respectively.

Preferred Stock  – 1,000,000 voting shares authorized and 850,000 non-voting shares authorized, $1.00 par value, no shares outstanding.

Stockholders – As of December 15, 2006, Toro had approximately 4,460 stockholders of record.

The following table sets forth information with respect to shares of common stock of the company purchased by the company during each of the three fiscal months in the period ended October 31, 2006.

1    On July 18, 2006, the company’s Board of Directors authorized the repurchase of 3,000,000 shares of the company’s common stock in open-market or in privately negotiated transactions. This program has no expiration date but may be terminated by the company’s Board of Directors at any time. The company purchased an aggregate of 1,185,187 shares during the periods indicated above under this program.

2    Includes 1,745 units (shares) of the company’s common stock purchased in open-market transactions at an average price of $44.31 per share on behalf of a rabbi trust formed to pay benefit obligations of the company to participants in deferred compensation plans. These 1,745 shares were not repurchased under the company’s repurchase program, as described in footnote 1 above.

19

ITEM 6. SELECTED FINANCIAL DATA

1    the company’s consolidated financial statements include results of hayter limited from February 8, 2005, date of acquisition.

2    Per share data has been adjusted for all fiscal years presented to reflect two separate two-for-one stock splits effective on March 28, 2005 and April 1, 2003.

3    Fiscal 2002 earnings from operations include restructuring and other expense of $8.4 million, which was not combined with selling, general, and administrative expense.

4    Fiscal 2002 net earnings and basic and diluted net earnings per share data include the cumulative effect of a change in accounting principle of $24.6 million, $0.49 per basic share, and $0.48 per diluted share related to the adoption of SFAS No. 142.

5    working capital is defined as current assets less current liabilities.

ITEM 7.         MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This Management’s Discussion and Analysis (MD&A) provides material historical and prospective disclosures intended to enable investors and other users to assess our financial condition and results of operations. Statements that are not historical are forward-looking and involve risks and uncertainties, including those discussed under the caption “Risk Factors” in Item 1A of this Annual Report on Form 10-K and elsewhere in this report. These risks could cause our actual results to differ materially from any future performance suggested below.

This MD&A is organized in the following major sections:

·       Overview, Summary of Fiscal 2006 Results, GrowLean Initiative, and Outlook for Fiscal 2007

·       Results of Operations

·       Performance by Business Segment

·       Financial Condition

·       Off-Balance Sheet Arrangements and Contractual Obligations

·       Critical Accounting Policies and Estimates

OVERVIEW

We design, manufacture, and market professional turf maintenance equipment and services, turf and micro irrigation systems, landscaping equipment, and residential yard products worldwide. We sell our products through a network of distributors, dealers, hardware retailers, home centers, mass retailers, and over the Internet, mainly through Internet retailers. Our businesses are organized into two operating segments: professional and residential. A third segment called “other” consists of domestic distribution companies and corporate activities. Our emphasis is to provide well-built, dependable, and innovative products supported by an extensive service network. A significant portion of our revenues has historically been attributable to new and enhanced products.

20

Summary of Fiscal 2006 Results

Fiscal 2006 was another good year with record net sales and double digit diluted net earnings per share growth. Our fiscal 2006 results included the following items of significance:

·       Our after-tax return on sales for fiscal 2006 was 7.0 percent, which exceeded our goal of 6 percent or more as part of our “6 + 8: Teamwork to the Top” initiative.

·       Net sales growth for fiscal 2006 was 3.2 percent over fiscal 2005 despite challenging economic conditions. Our net sales average annual growth rate was 7.1 percent over the three-year period ended October 31, 2006, just shy of our 8 percent goal.

·       International net sales continued to grow faster than our total consolidated net sales with an increase of 12.6 percent compared to fiscal 2005. International net sales comprised 27.0 percent of our total consolidated net sales in fiscal 2006 compared to 24.8 percent in fiscal 2005 and 20.7 percent in fiscal 2004.

·       Professional segment net sales increased 6.9 percent in fiscal 2006 compared to fiscal 2005 due primarily to strong demand in the worldwide golf market and new product introductions.

·       Our residential segment net sales were down 2.9 percent in fiscal 2006 compared to fiscal 2005 due primarily to weakening domestic economic conditions and higher fuel prices during the spring/summer season in 2006 that resulted in lower consumer spending for outdoor power equipment, as well as unfavorable weather conditions.

·       Fiscal 2006 net earnings increased 13.2 percent compared to fiscal 2005, and diluted net earnings per share increased 18.8 percent over fiscal 2005. This was our 8th consecutive year of double digit diluted net earnings per share growth before accounting changes.

·       Despite continued commodity cost increases, fiscal 2006 gross profit as a percentage of net sales rose to 35.0 percent compared to 34.6 percent in fiscal 2005 due in part to price increases and our continued use of Lean methods to reduce costs.

·       We continued to leverage our selling, general, and administrative costs. Selling, general, and administrative expense as a percentage of net sales was 24.0 percent in fiscal 2006, 24.3 percent in fiscal 2005, and 25.9 percent in fiscal 2004.

·       We generated strong cash flows from operations. Net cash provided by operating activities was $190.3 million in fiscal 2006 compared to $174.1 million in fiscal 2005, an increase of 9.3 percent.

·       We increased our fiscal 2006 quarterly cash dividend by 50 percent from the quarterly cash dividend paid in fiscal 2005.

·       We continued with our stock repurchase program in fiscal 2006, which reduced the number of our shares outstanding. This reduction resulted in an increase in diluted net earnings per share of approximately $0.14 in fiscal 2006 compared to fiscal 2005.

·       Our financial condition remained strong in fiscal 2006 with continued emphasis on asset management. Average inventory levels and average receivable balances slightly increased by 1.3 percent and 0.5 percent, respectively, compared to fiscal 2005. This allowed us to continue to reinvest in product development, brand building, and new technologies; repurchase shares of our stock; and increase our cash dividend in fiscal 2006.

GrowLean Initiative

Fiscal 2006 was the third and final year of our “6 + 8: Teamwork to the Top” initiative to achieve a consistent after-tax return on sales of 6 percent or more and grow revenues at an average annual rate of 8 percent or more over the three-year period ended October 31, 2006. We made significant strides in our journey of continuous improvement by employing Lean methods to eliminate waste and reduce costs throughout our organization. While we fell short of attaining the 8 percent three-year average annual net sales growth goal of our initiative by 0.9 percentage points, we far exceeded our profitability goal with an after-tax return on sales of 7.0 percent for fiscal 2006.

We are launching our next-generation initiative for fiscal years 2007 through 2009 called “GrowLean.” This initiative will focus our efforts more intensely on revenue growth while maximizing our use of Lean methods to reduce costs and improve quality and efficiency in our manufacturing facilities and corporate offices. We believe we have opportunities to create a leaner, cohesive enterprise that has the potential to deliver sustainable financial performance.

Building a Growth Enterprise. We have identified several strategic focus areas to drive revenue growth in our businesses and accelerate opportunities to expand our global presence through stronger customer relations, acquisitions, alliances, and new partnerships. In order to meet our “GrowLean” initiative goal to grow net sales at an average annual rate of 8 percent or more over a three-year period, we plan to invest in new product development, marketing, distribution, and other strategies to help build market share and strengthen our brand worldwide. At the same time, we expect to pursue targeted acquisitions using a disciplined approach that complement our existing brands and product portfolio, and we have taken strides in this area with the addition of the new office of Business and Strategic Development. We also expect to increase our investment in developing innovative, customer-valued products to generate revenue growth.

Building a Lean Enterprise. Our continuous improvement journey, which was part of our two previous three-year initiatives, created awareness on our part of the root causes of waste and inefficiency throughout our entire organization. We believe we now have a strong foundation on which to elevate our internal use of Lean methods while expanding them externally to our suppliers

21

and distribution partners. The goal of the “GrowLean” initiative is to achieve a consistent after-tax return on sales of 7 percent or more over the three-year period ending October 31, 2009. To accomplish this, we plan to employ Lean methods, such as Value Stream Mapping, to identify and eliminate constraints and barriers within and across our businesses and functions. In addition, we plan to fine-tune enterprise-wide systems, such as Design for Manufacturing and Assembly, to deliver products more competitively and efficiently.

Outlook for Fiscal 2007

Overall, fiscal 2006 was a good year and we believe we are in a position for yet another good year in fiscal 2007. We believe the key drivers for our anticipated growth in fiscal 2007 will include, among many others, these main factors:

·       We anticipate continued success in our product innovation efforts and customer acceptance of our new products. Consistent with our focus on asset management, our field inventory levels are at expected levels, which we believe will help set the stage for our successful introduction of new products in fiscal 2007.

·       We anticipate strong growth in our professional segment as we plan to increase our market share by enhancing our product offering and focusing on markets that we believe are underserved by our brand. In addition, retail demand in the landscape contractor market has been relatively soft for the past two years as customers delayed new equipment purchases. For fiscal 2007, we expect this market to improve slightly as we anticipate customers will replace their existing equipment, and we are ready to capitalize on this with our existing products and new product launches.

·       Fiscal 2006 was a challenging year for our residential segment as economic conditions weakened and consumer confidence was down in the U.S. during the spring/summer selling season. This continues to be a concern for us as we enter fiscal 2007. However, we are facing the challenge with a broad array of new product offerings and expanded product placement at a key retailer in fiscal 2007.

·       International markets have in the past and will continue to be a focus for us to grow our revenues. Many opportunities exist abroad, and our goal is for international sales to comprise a larger percentage of our total consolidated net sales.

·       During fiscal 2006, we again experienced rising costs for commodities. We expect costs to continue to increase in fiscal 2007, as we anticipate that increased worldwide demand and other factors to drive commodity prices higher. We have made significant progress using Lean methods and principles, and we plan to continue this focus as part of our new “GrowLean” initiative to offset these rising costs.

We will continue to keep a cautionary eye on the weather, world economies, field inventory levels, commodity prices, and other factors identified under the caption “Risk Factors” in Item 1A of this Annual Report on Form 10-K, which could cause our actual results to differ from our outlook.

RESULTS OF OPERATIONS

Fiscal 2006 net earnings were $129.1 million compared to $114.1 million in fiscal 2005, an increase of 13.2 percent. Fiscal 2006 diluted net earnings per share were $2.91, an increase of 18.8 percent over $2.45 per share in fiscal 2005. The primary factors contributing to the net earnings increase were higher net sales, an increase in gross margins, improved leveraging of selling, general, and administrative expense, and higher other income. In addition, our share repurchase program resulted in an increase in diluted net earnings per share of approximately $0.14 in fiscal 2006 compared to fiscal 2005.

Fiscal 2005 net earnings were $114.1 million compared to $102.7 million in fiscal 2004, an increase of 11.1 percent. Fiscal 2005 diluted net earnings per share were $2.45, an increase of 21.3 percent over $2.02 per share in fiscal 2004. The primary factors contributing to the net earnings increase were higher net sales, lower incentive compensation expense, and improved leveraging of selling, general, and administrative expense. However, the growth in fiscal 2005 net earnings relative to fiscal 2004 was tempered by higher costs for steel, resin, and other commodities.

The following table summarizes our results of operations as a percentage of our consolidated net sales.

Fiscal 2006 Compared With Fiscal 2005

Net Sales. Worldwide net sales in fiscal 2006 were $1,836.0 million compared to $1,779.4 million in fiscal 2005, an increase of 3.2 percent. Factoring out the effect of the additional sales from Hayter Limited (Hayter), which we acquired in February 2005, net sales increased 2.8 percent in fiscal 2006 compared to fiscal 2005. Net sales growth was primarily driven by:

·       Strong international net sales that grew 12.6 percent as a result of the acquisition of Hayter as well as increased worldwide demand and new products introduced within the past two years.

·       Select price increases on some products.

·       Increased sales in most of the professional segment markets due to the success of introducing new products, strong retail demand, and growth in the worldwide golf market.

22

Somewhat offsetting those positive factors was:

·       A decline in domestic residential segment net sales for most product lines primarily as a result of a slow down in consumer spending in the U.S. during the spring/summer season in 2006 for outdoor power equipment and unfavorable weather conditions.

·       Unfavorable currency exchange rates that reduced our net sales by approximately $6.5 million.

Looking ahead, we expect our net sales annual growth rate to be higher in fiscal 2007 compared to fiscal 2006, driven primarily by the introduction of new products and anticipated continued growth in our international businesses.

Gross Profit. Gross profit as a percentage of net sales increased by 0.4 percentage points from 34.6 percent in fiscal 2005 to 35.0 percent in fiscal 2006. This increase was mainly the result of the following factors:

·       Price increases introduced on some products.

·       A higher proportionate share of professional segment sales that carry higher average gross margins than residential segment sales.

·       Cost reduction efforts, including benefits from past and continuing profit improvement initiatives.

·       Lower excess and obsolete parts inventory expense.

·       The Hayter acquisition, which negatively impacted gross margins in fiscal 2005, due to the purchase accounting effect of recording the fair value of the inventory acquired as the inventory was sold.

Somewhat offsetting those positive factors were:

·       Continued rising commodity costs as well as higher freight costs due to higher fuel costs and an increase in demand for transportation.

·       Lower gross margins for the new line of riding products in the residential segment.

·       A charge for customs duties.

Looking ahead, gross profit as a percentage of net sales for fiscal 2007 compared to fiscal 2006 is expected to remain the same or improve slightly. We anticipate that benefits from our ongoing profit improvement initiatives, driven by our emphasis on lean manufacturing, will in part offset anticipated higher costs of commodities.

Selling, General, and Administrative (SG&A) Expense. SG&A expense increased 1.8 percent from fiscal 2005. SG&A expense as a percentage of net sales decreased to 24.0 percent in fiscal 2006 compared to 24.3 percent in fiscal 2005. The decrease in SG&A expense as a percentage of net sales was due primarily to the following factors:

·       A reduction in self-insurance costs due to favorable claims experience.

·       Lower incentive compensation expense due mainly to less favorable financial results for our long-term incentive plans.

·       Leveraging the fixed portion of SG&A costs over higher sales volumes.

Somewhat offsetting those decreases were:

·       Increased investments in engineering, marketing, service, and information systems as part of our “6 + 8: Teamwork to the Top” initiative.

·       Higher warranty expense due mainly to special provisions for major product modifications and a product recall.

Looking ahead, SG&A expense is expected to increase, and as a percentage of net sales, SG&A expense is expected to remain the same or decrease slightly in fiscal 2007 compared to fiscal 2006, as we expect to continue to increase our investments in engineering, marketing, and information systems.

Interest Expense. Interest expense for fiscal 2006 slightly decreased by 0.3 percent compared to fiscal 2005 due to lower average levels of short-term debt, which was somewhat offset by higher average interest rates.

Other Income, Net. Other income, net consists mainly of interest income, financing income, litigation settlements and recoveries, currency exchange rate gains and losses, and equity losses from investments. Other income, net for fiscal 2006 increased $2.3 million compared to fiscal 2005. This increase was due mainly to the following factors:

·       Currency exchange rate gains in fiscal 2006 compared to currency exchange rate losses in fiscal 2005.

·       Higher litigation settlement recoveries.

·       A loss on the sale of a business in fiscal 2005.

Provision for Income Taxes. The effective tax rate for fiscal 2006 remained unchanged at 33.0 percent compared to fiscal 2005.

Looking ahead, the tax rate for fiscal 2007 is expected to be approximately 33.5 percent. The American Jobs Creation Act of 2004 provides for a variety of changes in the tax law, including a phased elimination of the extra-territorial income (ETI) exclusion and the addition of a domestic manufacturing benefit. The ETI exclusion for foreign sales will be phased out over two years beginning in 2005. The deduction for income from qualified domestic production activities will be phased-in from 2005 through 2010. Similar to the ETI benefit, the domestic manufacturing benefit has no effect on deferred tax assets and liabilities existing at the enactment date. Rather, the impact of this deduction will be reported in the period in which the deduction is claimed on the federal income tax return. We anticipate that the net effect of the phase-out of the ETI and the phase-in of this new deduction should result in an increase of approximately 1 percent on our effective tax rate for fiscal 2007, which we expect will be somewhat offset by the extension of the research and development tax credit.

23

Fiscal 2005 Compared With Fiscal 2004

Net Sales. Worldwide net sales in fiscal 2005 were $1,779.4 million compared to $1,652.5 million in fiscal 2004, an increase of 7.7 percent. Factoring out the effect of our southeastern-based distributor sold in October 2004, our southwestern-based distributor sold in November 2004, and the additional sales from our acquisition of Hayter in February 2005, net sales increased 6.9 percent in fiscal 2005 compared to fiscal 2004. Net sales growth was primarily driven by:

·       Strong international net sales that grew 29.1 percent as a result of the acquisition of Hayter as well as increased demand and new products introduced within the past two years, particularly in the golf and residential markets.

·       Increased shipments to the golf and grounds and sports fields markets due to the success of introducing new products and strong retail demand.

·       Higher shipments of new Lawn-Boy products due to additional placement in the home center distribution channel.

·       Select price increases on some products.

·       Favorable currency rates that contributed approximately 1 percent of the net sales growth for fiscal 2005. Excluding currency effects, international net sales were up 23.8 percent for fiscal 2005.

Somewhat offsetting the factors contributing to our net sales growth was a decline in domestic residential segment net sales for most product lines primarily as a result of strong competition and unfavorable weather conditions in key domestic markets.

Gross Profit. Gross profit as a percentage of net sales decreased by 1.3 percentage points from 35.9 percent in fiscal 2004 to 34.6 percent in fiscal 2005. This decline was mainly the result of the following factors:

·       Higher costs for steel, steel-based component parts, resin, and other commodities.

·       Increased sales of lower margin products, including the impact of Hayter product sales that carry lower margins.

·       Higher excess and obsolete parts inventory expense.

·       The Hayter acquisition that negatively impacted gross margins due to the purchase accounting effect of recording the fair value of the inventory acquired as the inventory was sold.

·       Increased outbound freight costs due mainly to higher fuel costs.

Somewhat offsetting those negative factors were:

·       Price increases introduced on some products.

·       Cost reduction efforts, including ongoing benefits from past and continuing profit improvement initiatives.

Selling, General, and Administrative Expense. SG&A expense increased 1.1 percent from fiscal 2004. SG&A expense as a percentage of net sales decreased to 24.3 percent in fiscal 2005 compared to 25.9 percent in fiscal 2004. The decrease in SG&A expense as a percentage of net sales was due primarily to the following factors:

·       Lower incentive compensation expense in fiscal 2005 compared to fiscal 2004 as a result of the exceptional financial performance in fiscal 2004 relative to the established incentive goals as well as the impact of adopting Statement of Financial Accounting Standard (SFAS) No. 123R in fiscal 2005. In fiscal 2004, we accounted for stock-based compensation under the provisions of Accounting Principles Board Opinion No. 25, “Accounting for Stock Issued to Employees,” (APB No. 25), which resulted in higher compensation expense for our Performance Share Plan due to the increase in our stock price during fiscal 2004.

·       Reduced warranty expense due to lower costs for major product modifications in fiscal 2005 compared to fiscal 2004 as well as continued lower claims experience on certain product lines.

·       Leveraging the fixed portion of SG&A costs over higher sales volumes.

Somewhat offsetting those cost decreases were:

·       Increased investments in engineering, marketing, and information systems as part of our “6 + 8” initiative.

·       Higher administrative expenses, mainly from increased costs related to Sarbanes-Oxley Act of 2002 Section 404 internal controls compliance and higher bad debt expense due mainly to a recovery in fiscal 2004 of a previously written off note receivable.

Interest Expense. Interest expense for fiscal 2005 increased 14.2 percent compared to fiscal 2004 due primarily to higher average levels of short-term debt as a result of increased stock repurchases and the acquisition of Hayter, as well as higher average interest rates.

Other Income, Net. Other income, net for fiscal 2005 increased $1.7 million compared to fiscal 2004. This increase was due mainly to lower litigation settlement expense in fiscal 2005 compared to fiscal 2004.

Provision for Income Taxes. The effective tax rate for fiscal 2005 was unchanged from 33.0 percent in fiscal 2004.

PERFORMANCE BY BUSINESS SEGMENT

As more fully described in Note 11 of the notes to consolidated financial statements, we operate in two reportable business segments: professional and residential. A third reportable segment called “other” consists of company-owned distributor operations in the United States, corporate activities, and financing functions. Effective as of the beginning of fiscal 2005, we combined our former distribution segment with the “other” segment because our distribution segment no longer met the quantitative thresholds for separate reporting as an operating segment for all periods presented. Prior periods have been reclassified to conform to the new presentation. Operating earnings for each of our two business

24

segments is defined as earnings from operations plus other income, net. Operating loss for the “other” segment includes earnings (loss) from domestic wholly owned distribution company operations, corporate activities, including corporate financing activities, other income, and interest expense.

The following information provides perspective on our business segments’ net sales and operating results.

Professional

Professional segment net sales represented 67 percent, 64 percent, and 62 percent of consolidated net sales for fiscal 2006, 2005, and 2004, respectively. The following table shows the professional segment net sales, operating earnings, and operating earnings as a percent of net sales.

Net Sales. Worldwide net sales for the professional segment in fiscal 2006 were up 6.9 percent compared to fiscal 2005 primarily as a result of the following factors:

·       Worldwide shipments of most product lines increased, driven primarily by our success in introducing new products during the past two years.

·       Strong worldwide demand in the golf and sports field and grounds markets that resulted in higher equipment and irrigation product sales.

·       Price increases introduced on some products.

·       Significantly higher international net sales as a result of continued strong demand in the golf market and the acquisition of Hayter.

Field inventory levels for the professional segment were slightly higher, but within our expectations as of the end of fiscal 2006 compared to the end of fiscal 2005. This was due in part to reduced orders and lower shipments of landscape contractor equipment products in the fourth quarter of fiscal 2006 compared to the fourth quarter of fiscal 2005.

Worldwide net sales for the professional segment in fiscal 2005 were up 11.3 percent compared to fiscal 2004. Worldwide shipments of most product lines increased due to the successful introduction of new products and price increases introduced on some products. International professional segment net sales were up significantly due to the acquisition of Hayter, strong demand in the golf market, and a weaker U.S. dollar compared to the currencies in international markets where we conduct business.

Looking ahead, net sales for the professional segment are expected to grow in fiscal 2007 compared to fiscal 2006 as we expect new products to be well received and increase our market share, and we anticipate continued growth in international markets.

Operating Earnings. Operating earnings for the professional segment in fiscal 2006 increased 9.8 percent compared to fiscal 2005. Expressed as a percentage of net sales, professional segment operating margins increased to 18.6 percent compared to 18.1 percent in fiscal 2005. The following factors impacted professional segment operating earnings:

·       Higher gross margins in fiscal 2006 compared to fiscal 2005 due to continued cost reduction efforts from profit improvement initiatives, price increases on some products, and increased sales of higher margin products. However, higher commodity and freight costs somewhat tempered the increase in gross margins and operating earnings.

·       SG&A expense as a percentage of net sales was higher in fiscal 2006 compared to 2005 due to an increase in warranty expense and increased investments for marketing, engineering, and service.

Operating earnings for the professional segment in fiscal 2005 increased 19.8 percent compared to fiscal 2004. Expressed as a percentage of net sales, professional segment operating margin increased to 18.1 percent in fiscal 2005 compared to 16.8 percent in fiscal 2004. The operating profit improvement was due mainly to higher gross margins as the result of cost reduction efforts from profit improvement initiatives, price increases on some products, increased sales of higher margin products, and lower manufacturing costs from increased plant utilization, somewhat offset by higher commodity costs. Lower SG&A expense as a percentage of net sales also contributed to the operating earnings improvement due to leveraging the fixed portion of SG&A costs over higher sales volumes.

Looking ahead, professional segment operating earnings are anticipated to improve in fiscal 2007 compared to fiscal 2006 due to expected sales growth, slight improvement in gross margins, and leveraging of SG&A expense over higher planned sales volumes.

Residential

Residential segment net sales represented 31 percent, 33 percent, and 34 percent of consolidated net sales for fiscal 2006, 2005, and 2004, respectively. The following table shows the residential segment net sales, operating earnings, and operating earnings as a percent of net sales.

25

Net Sales. Worldwide net sales for the residential segment in fiscal 2006 were down 2.9 percent compared to fiscal 2005 primarily as a result of the following factors:

·       Lower sales of walk power mowers due to weakening domestic economic conditions and higher fuel prices during the spring/summer season in 2006 that resulted in lower consumer spending for outdoor power equipment.

·       Decreased sales of snow throwers in the domestic market as a result of the lower levels of snow fall in the U.S. during the 2005-2006 winter season.

·       A decline in retail irrigation product sales sold through the home center distribution channel due to unfavorable weather conditions in key domestic markets and lost placement of certain models at a key retailer.

·       Lower electric trimmer product shipments due to a slow down of consumer spending and strong competition.

Somewhat offsetting those negative factors were:

·       Higher worldwide shipments of riding products as we introduced new models and expanded product placement at a key retailer.

·       Increased international sales due to new product introductions, higher snow thrower product shipments due to heavy snow falls in Europe during the 2005-2006 winter season, and strong sales of Pope products in Australia.

Worldwide net sales for the residential segment in fiscal 2005 were up by 5.2 percent compared to fiscal 2004. This increase was primarily due to higher shipments of walk power mowers, including in particular, the new Lawn-Boy products as a result of expanded product placement in the home center distribution channel. However, domestic shipments of Toro walk power mowers declined due mainly to a shift of some sales to the new line of Lawn-Boy walk power mowers. International residential segment sales increased significantly as a result of the acquisition of Hayter, introduction of new products, and a weaker U.S. dollar. Somewhat offsetting those increases were lower riding product and electric blower product shipments due to strong competition. In addition, retail irrigation product sales declined due to unfavorable weather conditions in key domestic markets.

Looking ahead, residential segment net sales are expected to increase in fiscal 2007 compared to fiscal 2006 primarily as a result of anticipated growth in domestic riding product sales due to the introduction of new products and the anticipated growth of the zero-turning radius riding mower market. In addition, we anticipate continued growth in international markets as a result of planned new product introductions.

Operating Earnings. Operating earnings for the residential segment in fiscal 2006 decreased 32.0 percent compared to fiscal 2005. Expressed as a percentage of net sales, residential segment operating margins declined to 6.0 percent compared to 8.6 percent in fiscal 2005. The following factors impacted residential segment operating earnings:

·       Lower gross margins as a result of higher costs for commodities combined with minimal price increases due to competitive conditions, lower margins for the new line of riding products, higher freight expense, and a charge for customs duties.

·       Higher SG&A expense as a percentage of net sales due to lower sales volumes and an increase in warranty expense for a product recall.

Operating earnings for the residential segment in fiscal 2005 decreased 18.8 percent compared to fiscal 2004. Expressed as a percentage of net sales, residential segment operating margins declined to 8.6 percent compared to 11.1 percent in fiscal 2004 mainly as a result of lower gross margins due to higher costs for commodities combined with minimal price increases due to competitive conditions, increased sales of lower margin products, higher manufacturing costs from lower plant utilization as we curtailed production to reduce inventory levels, and lower gross margins from sales of Hayter products. However, SG&A expense as a percentage of net sales was lower due to reduced warranty expense for major product modifications in fiscal 2005 compared to fiscal 2004 as well as lower claims experience.

Looking ahead, residential segment earnings in fiscal 2007 are expected to improve compared to fiscal 2006 due to an anticipated increase in gross margins for new products and leveraging SG&A expense over higher planned sales volumes.

Other

Net Sales. Net sales for the other segment includes sales from our wholly owned domestic distribution companies less sales from the professional and residential segments to those distribution companies. In addition, elimination of the professional and residential segments’ floor plan interest costs from the Toro Credit Company are also included in this segment. The other segment net sales in fiscal 2006 decreased 12.1 percent compared to fiscal 2005 due to lower sales at our company-owned distributors as a result of the change in the method of product distribution (to shipping our Exmark product directly to dealers) that impacted the territory served by our Midwestern distributorship.

26

The other segment net sales in fiscal 2005 decreased 26.7 percent compared to fiscal 2004 due to the sale of two distribution companies in the fourth calendar quarter of 2004.

Operating Loss. Operating loss for the other segment in fiscal 2006 decreased by 20.9 percent compared to fiscal 2005. This loss decrease was primarily the result of lower incentive compensation expense, a reduction in self-insurance costs, and currency exchange rate gains in fiscal 2006 compared to currency exchange rate losses in fiscal 2005.

Operating loss for the other segment in fiscal 2005 increased by 6.9 percent compared to fiscal 2004. This loss increase was primarily the result of higher administrative expenses, mainly for information systems and Sarbanes-Oxley Act of 2002 Section 404 internal controls compliance costs, and higher interest expense, somewhat offset by lower incentive compensation costs, as previously described.

FINANCIAL CONDITION

Working Capital

Our financial condition remains strong. Our average working capital for fiscal 2006 was $337.9 million compared to $309.2 million in fiscal 2005, an increase of 9.2 percent. This increase was due mainly to lower average short-term debt.

The following table highlights several key measures of our working capital performance.

Average short-term debt decreased in fiscal 2006 compared to fiscal 2005 primarily because we purchased Hayter and more shares of our common stock during fiscal 2005 compared to fiscal 2006. Average receivables, net increased slightly in fiscal 2006 compared to fiscal 2005 due to higher sales volumes; however, average days outstanding for receivables decreased to 75 days in fiscal 2006 compared to 77 days in fiscal 2005. Average net inventories increased slightly by 1.3 percent in fiscal 2006 compared to fiscal 2005; however, average inventory turnover improved slightly by 1.1 percent in fiscal 2006 compared to fiscal 2005. These favorable changes were driven by efforts to improve asset management.

We expect that average receivables, net in fiscal 2007 will increase compared to fiscal 2006 due to higher planned sales volumes, while average inventories, net are expected to decrease in fiscal 2007 compared to fiscal 2006. We anticipate both average days outstanding for receivables and average inventory turnover to slightly improve in fiscal 2007 compared to fiscal 2006 as we plan to continue our efforts to improve asset utilization.

Capital Expenditures and
Other Long-Term Assets

Fiscal 2006 capital expenditures of $39.9 million were 6.6 percent higher compared to fiscal 2005. This increase was primarily attributable to production equipment and tooling expenditures for new products. Capital expenditures for fiscal 2007 are anticipated to be approximately $5 to $10 million higher than fiscal 2006 as we plan to continue to invest in manufacturing equipment and tooling for new products.

Long-term assets as of October 31, 2006 were $264.9 million compared to $269.7 million as of October 31, 2005, a slight decrease of 1.8 percent.

Capital Structure

The following table details the components of our total capitalization and key ratios.

Our debt-to-capitalization ratio was slightly lower in fiscal 2006 compared to fiscal 2005 due mainly to an increase in stockholders’ equity as a result of higher net earnings in fiscal 2006 compared to fiscal 2005.

Liquidity and Capital Resources

Our businesses are seasonally working capital intensive and require funding for purchases of raw materials used in production, replacement parts inventory, capital expenditures, expansion and upgrading of existing facilities, as well as for financing receivables from customers. We believe that cash generated from operations, together with our fixed rate long-term debt, bank credit lines, and cash on hand, will provide us with adequate liquidity to meet our anticipated operating requirements. We believe that the combination of funds available through existing or anticipated financing arrangements and forecasted cash flows will be sufficient to provide the necessary capital resources for our anticipated working capital needs, capital expenditures, debt repayments, quarterly cash dividend payments, and stock repurchases for at least the next twelve months.

We have $75 million of notes due on June 15, 2007 that are classified as long-term debt as we are in the process of evaluating several alternatives for replacing this debt, including refinancing the obligation on a long-term basis using funds available under our

27

current credit facilities. We believe we will obtain cost effective financing in advance of the repayment date for the notes.

Each quarter in fiscal 2006, our Board of Directors declared a cash dividend of $0.09 per share, which was a 50 percent increase over our cash dividend of $0.06 per share paid each quarter in fiscal 2005. Our Board of Directors recently increased our first quarter of fiscal 2007 quarterly cash dividend by 33 percent to $0.12 per share from the quarterly cash dividend paid in the first quarter of fiscal 2006.

Cash Flow

Cash flows provided by (used in) operating, investing, and financing activities during the past three fiscal years are shown in the following table.

Cash Flows Provided by Operating Activities. Our primary source of funds is cash generated from operations. In fiscal 2006, cash provided by operating activities increased by 9.3 percent from fiscal 2005. This increase was due primarily to higher net earnings in fiscal 2006 compared to fiscal 2005.

Cash Flows Used in Investing Activities. Capital expenditures and acquisitions are our primary uses of capital resources. These investments have enabled our sales growth in diverse and new markets, helped us to meet product demand, and increased our manufacturing efficiencies. Cash used in investing activities decreased 44.4 percent in fiscal 2006 compared to fiscal 2005 due mainly to cash used in fiscal 2005 for the purchase of Hayter, somewhat offset by an increase in purchases of property, plant, and equipment in fiscal 2006 compared to fiscal 2005.

Cash Flows Used in Financing Activities. Cash used in financing activities was lower by 10.5 percent in fiscal 2006 compared to fiscal 2005. This decline was primarily driven by higher levels of funds used to purchase our common stock in fiscal 2005 compared to fiscal 2006 and an increase in tax benefits for stock-based awards in fiscal 2006 compared to fiscal 2005. This decline was somewhat offset by higher cash dividends paid on Toro common stock in fiscal 2006 compared to fiscal 2005.

Credit Lines and Other Capital Resources

Our business is seasonal, with accounts receivable balances historically increasing between January and April as a result of higher sales volumes and extended payment terms made available to our customers, and decreasing between May and December when payments are received. The seasonality of production and shipments causes working capital requirements to fluctuate during the year. Our peak borrowing usually occurs between February and May. Seasonal cash requirements are financed from operations and with short- and medium-term financing arrangements, including a $175.0 million unsecured senior five-year revolving credit facility, which expires in October 2010. Interest expense on this credit line is determined based on a LIBOR rate plus a basis point spread defined in the credit agreement. In addition, our non-U.S. operations and a domestic subsidiary also maintain unsecured short-term lines of credit of approximately $17 million. These facilities bear interest at various rates depending on the rates in their respective countries of operation. We also have a letter of credit subfacility as part of our credit agreement. Average short-term debt was $43.4 million in fiscal 2006 compared to $63.4 million in fiscal 2005, a decrease of $20.0 million. This decline was primarily attributable to cash used in fiscal 2005 for the acquisition of Hayter and significant stock repurchases. As of October 31, 2006, we had $191.6 million of unutilized availability under our credit agreements.

Significant financial covenants in our credit agreement are interest coverage and debt-to-capitalization ratios. We were in compliance with all covenants related to our credit agreement as of October 31, 2006, and expect to be in compliance with all covenants during fiscal 2007. Our credit agreement requires compliance with all of the covenants defined in the agreement. If we were out of compliance with any debt covenant required by our credit agreement, the banks could terminate their commitments unless we could negotiate a covenant waiver from the banks. In addition, our long-term public notes and debentures could become due and payable if we were unable to obtain a covenant waiver or refinance our medium-term debt under our credit agreement. If our credit rating falls below investment grade, the interest rate we currently pay on outstanding debt under the credit agreement would increase, but the credit commitment could not be cancelled by the banks based solely on a ratings downgrade. Our long-term unsecured senior, non-credit enhanced debt is rated by Standard and Poor’s Ratings Group at BBB- and by Moody’s Investors Service at Baa3, which is unchanged from the rates in fiscal 2005.

Share Repurchase Plan

During fiscal 2006, we continued our emphasis on repurchasing shares of our common stock as a means of utilizing excess cash and reducing our shares outstanding. In addition, our repurchase programs provided shares for use in connection with our equity compensation programs. In July 2006, our Board of Directors authorized the repurchase of up to an additional 3,000,000 shares of our common stock in open-market or privately negotiated transactions. This repurchase authorization has no expiration date but may be terminated by our Board of Directors at any time. As of

28

October 31, 2006, 1,476,904 shares remained available for repurchase under our Board authorization.

The following table provides information with respect to repurchases of our common stock during the past three fiscal years.

Off-Balance Sheet Arrangements and
Contractual  Obligations

We do not customarily enter into off-balance sheet arrangements, except for off-balance sheet arrangements related to our customer financing activities, inventory purchase commitments, operating lease commitments, and currency contracts disclosed in the contractual obligations table below. Moreover, it is not our normal policy to issue guarantees to third parties.

Wholesale Financing. Toro Credit Company (TCC), a wholly owned financing subsidiary, provides financing for our North American Toro distributors and approximately 200 of our domestic dealers for select products that we manufacture. Independent North American Toro and Exmark distributors and dealers that do not finance through TCC generally finance their inventories with third party financing companies. All outstanding receivables of TCC are reflected in our consolidated balance sheets.

TCC and other third party financing companies purchase selected receivables from us and our distributors and dealers for extended periods that assist our distributors and dealers in carrying representative inventories of products. Down payments are not required and, depending on the finance program for each product line, finance charges are incurred by us, shared between us and the distributor and/or the dealer, or paid by the distributor or dealer. We retain a security interest in the distributors’ and dealers’ inventories, and make periodic physical checks of those inventories. Under the sales terms to distributors and dealers, finance charges are applied to outstanding balances from the earlier of the date when product is sold to a customer, or the expiration of company-supported finance terms granted at the time of sale, until payment is received by TCC or the third party finance company. Rates are generally fixed or based on the prime rate plus a fixed percentage depending on whether the financing is for a distributor or dealer. Rates may also vary based on the product that is financed. Distributors and dealers cannot cancel purchases after goods are shipped and are responsible for payment even if the equipment is not sold to retail customers.

Third party financing companies purchased $451.0 million of receivables of our financed products during fiscal 2006. The outstanding receivable balance owed from our distributors and dealers to third party financing companies was $189.1 million as of October 31, 2006. Our maximum exposure for credit recourse with a third party financing company related to receivables under these financing arrangements was $0.6 million as of October 31, 2006. We also enter into limited inventory repurchase agreements with third party financing companies. As of October 31, 2006, we were contingently liable to repurchase up to $3.5 million of inventory related to receivables under these financing arrangements. We have repurchased immaterial amounts of inventory from third party financing companies over the past three years. However, a decline in retail sales could cause this situation to change and thereby require us to repurchase financed product.

End-User Financing. We have agreements with a third party financing company to provide lease-financing options to golf course and sports fields and grounds equipment customers in North America and Europe. The purpose of these agreements is to increase sales by giving buyers of our products alternative financing options when purchasing our products. Under the terms of these agreements, we could be contingently liable for a portion of the credit collection and residual value risk on the underlying equipment financed under this program. Our maximum exposure for credit collection and residual value as of October 31, 2006 was $15.2 million. We have established a reserve for our estimated exposure related to this program.

We also have an agreement to sell certain accounts receivable and notes to a third party. The total amount of receivables and notes outstanding under this agreement may not exceed $10.0 million at any time. As of October 31, 2006, the company had sold $1.3 million of receivables and notes under the terms of this agreement.

In the normal course of business, we have arrangements with other financial institutions to provide various forms of financing options to end-user customers. From time to time, our company-owned distributorships also guarantee the residual value at the end of leases with third-party financing companies for product sold to customers. The amount of this potential contingent liability as of October 31, 2006 was $4.0 million. None of these other arrangements requires any additional material financial involvement by us.

Termination of our end-user financing arrangements, any material change to the terms in the financing arrangements, or availability of credit for our customers, any delay in securing replacement credit sources, or significant financed product repurchase requirements could have a material impact on our future operating results or financial condition; however, we do not anticipate those events are likely to occur.

Distributor Financing. From time to time, we enter into long-term loan agreements with some distributors. These transactions are used for expansion of the distributors’ businesses, acquisitions, refinancing working capital agreements, or facilitation of ownership changes. As of October 31, 2006 and 2005, we had outstanding notes receivable of $2.8 million and $9.5 million, respectively, from

29

several distribution companies. The amounts are included in other current and long-term assets on our consolidated balance sheets. The decrease of $6.7 million was the result of repayments on these loans.

Purchase Commitments. We have purchase commitments with some suppliers for materials and supplies as part of the normal course of business.

Contractual Obligations. The following table summarizes our contractual obligations as of October 31, 2006.

As of October 31, 2006, we also had $11.7 million in outstanding letters of credit issued during the normal course of business, as required by some vendor contracts.

Market Risk

Due to the nature and scope of our operations, we are subject to exposures that arise from fluctuations in interest rates, foreign currency exchange rates, and commodity prices. We are also exposed to equity market risk pertaining to the trading price of our stock. Additional information is presented in Item 7A, Quantitative and Qualitative Disclosures about Market Risk, and Note 13 of the notes to our consolidated financial statements.

Inflation

We are subject to the effects of inflation and changing prices. As previously mentioned, we experienced rising prices for steel, steel-based component parts, fuel, petroleum-based resins, and other commodities during fiscal 2006 and 2005 that had a negative impact on our gross margins and net earnings. In fiscal 2007, we expect average prices paid for commodities to increase compared to fiscal 2006. We expect to continue to attempt to mitigate the impact of these anticipated increases in commodity costs and other inflationary pressures by actively pursuing internal cost reduction efforts, reviewing alternative sourcing options, vendor negotiations, and by recovering a portion of these costs with price increases to customers.

Acquisition, Investment in Affiliate, and Divestitures

In fiscal 2005, we completed the acquisition of certain assets and assumed certain liabilities of Hayter. Hayter designs, manufactures, and markets residential and professional turf maintenance equipment primarily for the United Kingdom market, with annual sales of approximately $50 million.

In fiscal 2004, we entered into a joint venture agreement with a leading engine manufacturer to source two-cycle snow thrower engines for us and other customers.

In fiscal 2004, we completed the sale of our southeastern-based U.S. distributorship, which was acquired in fiscal 2003. During the first quarter of fiscal 2005, we also completed the sale of our southwestern-based U.S. distribution company.

Critical Accounting Policies and Estimates

In preparing our consolidated financial statements in conformity with U.S. generally accepted accounting principles, we must make decisions that impact the reported amounts of assets, liabilities, revenues and expenses, and related disclosures. Such decisions include the selection of the appropriate accounting principles to be applied and the assumptions on which to base accounting estimates. In reaching such decisions, we apply judgments based on our understanding and analysis of the relevant circumstances, historical experience, and actuarial valuations. Actual amounts could differ from those estimated at the time the consolidated financial statements are prepared.

Our significant accounting policies are described in Note 1 of the notes to our consolidated financial statements. Some of those significant accounting policies require us to make difficult subjective or complex judgments or estimates. An accounting estimate is considered to be critical if it meets both of the following criteria: (i) the estimate requires assumptions about matters that are highly uncertain at the time the accounting estimate is made, and (ii) different estimates reasonably could have been used, or changes in the estimate that are reasonably likely to occur from period to period, would have a material impact on the presentation of our financial condition, changes in financial condition or results of operations. Our critical accounting estimates include the following:

Warranty Reserve. Warranty coverage on our products ranges from a period of six months to seven years, and covers parts, labor, and other expenses for non-maintenance repairs, provided operator abuse, improper use or negligence did not necessitate the repair. At the time of sale, we accrue a warranty reserve by product line for estimated costs in connection with future warranty claims. We also establish reserves for major rework campaigns. The amount of our warranty reserves is based primarily on the estimated number of products under warranty, historical average costs incurred to service warranty claims, the trend in the historical ratio of claims to sales, and the historical length of time between the sale and resulting warranty claim. We periodically assess the adequacy of our warranty reserves based on changes in these factors and record any necessary adjustments if actual claim experience indicates that adjustments are necessary. Actual

30

claims could be higher or lower than amounts estimated, as the amount and value of warranty claims are subject to variation due to such factors as performance of new products, significant manufacturing or design defects not discovered until after the product is delivered to customers, product failure rates, and higher or lower than expected service costs for a repair. We believe that analysis of historical trends and knowledge of potential manufacturing or design problems provide sufficient information to establish a reasonable estimate for warranty claims at the time of sale. However, since we cannot predict with certainty future warranty claims or costs associated with servicing those claims, our actual warranty costs may differ from our estimates. An unexpected increase in warranty claims or in the costs associated with servicing those claims would result in an increase in our warranty accrual and a decrease in our net earnings. As of October 31, 2006, we had $65.2 million accrued related to future estimated warranty claims.

Sales Promotions and Incentives. At the time of sale to a customer, we record an estimate for sales promotion and incentive costs, which are classified as a reduction of net sales or as a component of selling, general, and administrative expense. Examples of sales promotion and incentive programs include rebate programs on certain professional products sold to distributors, volume discounts, retail financing support, floor planning, cooperative advertising, commissions, and other sales discounts and promotional programs. The estimates for sales promotion and incentive costs are based on the terms of the arrangements with customers, historical payment experience, field inventory levels, volume purchases, and expectations for changes in relevant trends in the future. Actual results may differ from these estimates if competitive factors dictate the need to enhance or reduce sales promotion and incentive accruals or if the customer usage and field inventory levels vary from historical trends. Adjustments to sales promotions and incentive accruals are made from time to time as actual usage becomes known in order to properly estimate the amounts necessary to generate consumer demand based on market conditions as of the balance sheet date. As of October 31, 2006, we had $50.1 million accrued for sales promotions and incentives.

Inventory Valuation. We value our inventories at the lower of the cost of inventory or net realizable value, with cost determined by either the last-in, first-out (LIFO) method for most U.S. inventories or the first-in, first-out (FIFO) method for all other inventories. We establish reserves for excess, slow moving, and obsolete inventory based on inventory levels, expected product lives, and forecasted sales demand. Valuation of inventory can also be affected by significant redesign of existing products or replacement of an existing product by an entirely new generation product. In assessing the ultimate realization of inventories, we are required to make judgments as to future demand requirements compared with inventory levels. Reserve requirements are developed according to our projected demand requirements based on historical demand, competitive factors, and technological and product life cycle changes. It is possible that an increase in our reserve may be required in the future if there is a significant decline in demand for our products and we do not adjust our manufacturing production accordingly.

We also record a reserve for inventory shrinkage. Our inventory shrinkage reserve represents anticipated physical inventory losses that are recorded based on historical loss trends, ongoing cycle-count and periodic testing adjustments, and inventory levels. Though management considers reserve balances adequate and proper, changes in economic conditions in specific markets in which we operate could have an effect on the reserve balances required. As of October 31, 2006, we had $17.7 million reserved for excess and obsolete inventory.

Accounts and Notes Receivable Valuation. We value accounts and notes receivable, net of an allowance for doubtful accounts. Each quarter, we prepare an analysis of our ability to collect outstanding receivables that provides a basis for an allowance estimate for doubtful accounts. In doing so, we evaluate the age of our receivables, past collection history, current financial conditions of key customers, and economic conditions. Based on this evaluation, we establish a reserve for specific accounts and notes receivable that we believe are uncollectible, as well as an estimate of uncollectible receivables not specifically known. Portions of our accounts receivable are protected by a security interest in products held by customers, which minimizes our collection exposure. A deterioration in the financial condition of any key customer or a significant slow down in the economy could have a material negative impact on our ability to collect a portion or all of the accounts and notes receivable. We believe that an analysis of historical trends and our current knowledge of potential collection problems provide us with sufficient information to establish a reasonable estimate for an allowance for doubtful accounts. However, since we cannot predict with certainty future changes in the financial stability of our customers or in the general economy, our actual future losses from uncollectible accounts may differ from our estimates. In the event we determined that a smaller or larger uncollectible accounts reserve is appropriate, we would record a credit or charge to selling, general, and administrative expense in the period that we made such a determination. As of October 31, 2006, we had $2.8 million reserved against our accounts and notes receivable.

New Accounting Pronouncements to be Adopted

In October 2006, the Financial Accounting Standards Board (FASB) issued SFAS No. 158, “Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans.” SFAS No. 158 requires employers to recognize on their balance sheets the funded status of pension and other postretirement benefit plans. In

31

addition, employers will recognize, as a component of other comprehensive income, changes in the funded status of pension and other postretirement benefit plans, such as actuarial gains and losses and prior service costs that arise during the year but are not recognized as components of net periodic benefit cost. SFAS No. 158 will require the measurement date of plan assets and benefit obligations to be as of the end of the employer’s fiscal year. We will adopt the provisions of SFAS No. 158, which requires the funded status of pension and other postretirement benefit plans to be recorded on the balance sheet as of October 31, 2007, as required, and we will adopt the provisions that require the measurement date of plan assets and benefit obligations to be the same as our fiscal year end as of October 31, 2009, as required. This new pronouncement is not expected to have a material impact on our financial condition, and will have no impact on our consolidated results of operations.

In August 2006, the FASB issued Staff Position No. AUG AIR-1, “Accounting for Planned Major Maintenance Activities.” This Staff Position prohibits the use of the accrue-in-advance method of accounting for planned major maintenance activities in annual and interim financial reporting periods. We will adopt the provisions of this Staff Position as of November 1, 2007, as required. We are currently evaluating the requirements of Staff Position No. AUG AIR-1 and do not expect the adoption of this Staff Position will have a material impact on our consolidated results of operations or financial condition.

In July 2006, the FASB issued Interpretation No. 48, “Accounting for Uncertainty in Income Taxes” (FIN No. 48). This interpretation clarifies the accounting for uncertainty in income taxes recognized in an entity’s financial statements in accordance with SFAS No. 109, “Accounting for Income Taxes.” It prescribes a recognition threshold and measurement attributes for financial statement disclosure of tax positions taken or expected to be taken on a tax return. We will adopt the provisions of this interpretation in the first quarter of fiscal 2008, as required. We are currently evaluating the requirements of FIN No. 48 and we do not expect this new pronouncement will have a material impact on our consolidated financial condition or results of operations.

ITEM 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to market risk stemming from changes in foreign currency exchange rates, interest rates, and commodity prices. We are also exposed to equity market risk pertaining to the trading price of our common stock. Changes in these factors could cause fluctuations in our net earnings and cash flows. See further discussions on these market risks below.

Foreign Currency Exchange Rate Risk. In the normal course of business, we actively manage the exposure of our foreign currency market risk by entering into various hedging instruments, authorized under company policies that place controls on these activities, with counterparties that are highly rated financial institutions. Our hedging activities involve the primary use of forward currency contracts. We use derivative instruments only in an attempt to limit underlying exposure from currency fluctuations and to minimize earnings and cash flow volatility associated with foreign currency exchange rate changes, and not for trading purposes. We are exposed to foreign currency exchange rate risk arising from transactions in the normal course of business, such as sales and loans to wholly owned subsidiaries as well as sales to third party customers and purchases from suppliers. Because our products are manufactured or sourced primarily from the United States, a stronger U.S. dollar generally has a negative impact on results from operations outside the United States, while a weaker dollar generally has a positive effect. Our primary currency exchange rate exposure is with the Euro, the Japanese yen, the Australian dollar, the Canadian dollar, the British pound, and the Mexican peso against the U.S. dollar.

We enter into various contracts, principally forward contracts that change in value as foreign exchange rates change, to protect the value of existing foreign currency assets, liabilities, anticipated sales, and probable commitments. Decisions on whether to use such contracts are made based on the amount of exposures to the currency involved and an assessment of the near-term market value for each currency. Worldwide foreign currency exchange rate exposures are reviewed monthly. The gains and losses on these contracts offset changes in the value of the related exposures. Therefore, changes in market values of these hedge instruments are highly correlated with changes in market values of underlying hedged items both at inception of the hedge and over the life of the hedge contract. During fiscal 2006, 2005, and 2004, the amount of losses treated as a reduction of net sales for contracts to hedge sales were $0.4 million, $3.0 million, and $7.1 million, respectively. The gains treated as a reduction to cost of sales for contracts to hedge inventory purchases was $0.1 million for fiscal 2006 and $1.3 million for fiscal 2005.

The following foreign currency exchange contracts held by us have maturity dates in fiscal 2007. All items are non-trading and

32

stated in U.S. dollars. Some derivative instruments we enter into do not meet the hedging criteria of SFAS No. 133, “Accounting for Derivative Instruments and Hedging Activities;” therefore, changes in fair value are recorded in other income, net. The average contracted rate, notional amount, pre-tax value of derivative instruments in accumulated other comprehensive loss (AOCL), and fair value impact of derivative instruments in other income, net as of October 31, 2006 were as follows:

Our net investment in foreign subsidiaries translated into U.S. dollars is not hedged. Any changes in foreign currency exchange rates would be reflected as a foreign currency translation adjustment, a component of accumulated other comprehensive loss in stockholders’ equity, and would not impact net earnings.

Interest Rate Risk. Our market risk on interest rates relates primarily to LIBOR-based short-term debt from commercial banks as well as the potential increase in fair value of long-term debt resulting from a potential decrease in interest rates. However, we do not have a cash flow or earnings exposure due to market risks on long-term debt. We currently do not use interest rate swaps to mitigate the impact of fluctuations in interest rates. As of October 31, 2006, our financial liabilities with exposure to changes in interest rates consisted mainly of $0.3 million of short-term debt outstanding. Assuming a hypothetical increase of one percent (100 basis points) in short-term interest rates, with all other variables remaining constant including the average balance of short-term debt outstanding during fiscal 2006, interest expense would have increased $0.4 million in fiscal 2006. Included in long-term debt is $175.0 million of fixed-rate debt that is not subject to variable interest rate fluctuations. As a result, we have no earnings or cash flow exposure due to market risks on our long-term debt obligations. As of October 31, 2006, the estimated fair value of long-term debt with fixed interest rates was $184.9 million compared to its carrying value of $175.0 million. The fair value is estimated by discounting the projected cash flows using the rate that similar amounts of debt could currently be borrowed.

Commodity Risk. We are subject to market risk from fluctuating market prices of certain purchased commodity raw materials including steel, aluminum, fuel, petroleum-based resin, and linerboard. In addition, we are a purchaser of components and parts containing various commodities, including steel, aluminum, copper, rubber, and others which are integrated into our end products. While such materials are typically available from numerous suppliers, commodity raw materials are subject to price fluctuations. We generally buy these commodities and components based upon market prices that are established with the vendor as part of the purchase process. We generally attempt to obtain firm pricing from most of our suppliers for volumes consistent with planned production. To the extent that commodity prices increase and we do not have firm pricing from our suppliers, or our suppliers are not able to honor such prices, we may experience a decline in our gross margins to the extent we are not able to increase selling prices of our products or obtain manufacturing efficiencies to offset increases in commodity costs. Further information regarding rising prices for commodities is presented in Item 7, section entitled “Inflation.”

We enter into fixed-price contracts for future purchases of natural gas in the normal course of operations as a means to manage natural gas price risks. These contracts meet the definition of “normal purchases or normal sales” and therefore, are not considered derivative instruments for accounting purposes. Our manufacturing facilities enter into these fixed-price contracts for approximately 70 to 85 percent of their monthly anticipated usage.

Equity Price Risk. The trading price volatility of Toro common stock impacts compensation expense related to our stock-based compensation plans. Further information is presented in Note 9 of the notes to our consolidated financial statements regarding our stock-based compensation plans.

33

Item 8.            Financial Statements and Supplementary Data

Management’s Report on Internal Control over Financial Reporting

Management is responsible for establishing and maintaining an adequate system of internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended, for The Toro Company and its subsidiaries. This system is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles.

The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements and even when determined to be effective, can only provide reasonable assurance with respect to financial statement preparation and presentation. Also, projection of any evaluation of the effectiveness of internal control over financial reporting to future periods is subject to the risk that controls may become inadequate because of changes in conditions, or that the degree or compliance with the policies or procedures may deteriorate.

Management, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the Company’s internal control over financial reporting as of October 31, 2006. In making this evaluation, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework. Based on this assessment, management concluded that the Company’s internal control over financial reporting was effective as of October 31, 2006.

KPMG LLP, the Company’s independent registered public accounting firm, audited management’s assessment of the effectiveness of the Company’s internal control over financial reporting and, based on that audit, issued the report which is included herein.

Further discussion of the Company’s internal controls and procedures is included in Item 9A of this report, under the caption “Controls and Procedures.”

34

Report of Independent Registered Public Accounting Firm on Internal Control over Financial Reporting

The Stockholders and Board of Directors
The Toro Company:

We have audited management’s assessment, included in the accompanying Management’s Report on Internal Control over Financial Reporting, that The Toro Company and its subsidiaries (the Company) maintained effective internal control over financial reporting as of October 31, 2006, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). The Toro Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting. Our responsibility is to express an opinion on management’s assessment and an opinion on the effectiveness of the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, evaluating management’s assessment, testing and evaluating the design and operating effectiveness of internal control, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the consolidated financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies and procedures may deteriorate.

In our opinion, management’s assessment that The Toro Company and its subsidiaries maintained effective internal control over financial reporting as of October 31, 2006, is fairly stated, in all material respects, based on the COSO criteria. Also, in our opinion, The Toro Company and its subsidiaries maintained, in all material respects, effective internal control over financial reporting as of October 31, 2006, based on the COSO criteria.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of The Toro Company and its subsidiaries as of October 31, 2006 and 2005, and the related consolidated statements of earnings, cash flows, and stockholders’ equity for each of the years in the three year period ended October 31, 2006, and our report dated December 22, 2006, expressed an unqualified opinion thereon.

Minneapolis, Minnesota
December 22, 2006

35

Report of Independent Registered Public Accounting Firm

The Stockholders and Board of Directors
The Toro Company:

We have audited the accompanying consolidated balance sheets of The Toro Company and subsidiaries as of October 31, 2006 and 2005, and the related consolidated statements of earnings, cash flows, and stockholders’ equity for each of the years in the three year period ended October 31, 2006. Our audits also included the financial statement schedule listed in Item 15(a) 2. These consolidated financial statements and schedule are the responsibility of the company’s management. Our responsibility is to express an opinion on these consolidated financial statements and schedule based on our audits.

We conducted our audits in accordance the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of The Toro Company and subsidiaries as of October 31, 2006 and 2005, and the results of their operations and their cash flows for each of the years in the three year period ended October 31, 2006 in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the effectiveness of The Toro Company’s internal control over financial reporting as of October 31, 2006, based on the criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated December 22, 2006, expressed an unqualified opinion on management’s assessment of, and the effective operation of, internal control over financial reporting.

Minneapolis, Minnesota

December 22, 2006

36

CONSOLIDATED STATEMENTS OF EARNINGS